Q.Calculate the output voltage if $V_1 = -0.2\text{ V}$ and $V_2 = 0.1\text{ V}$.

The summing amplifier, or inverting adder, extends the inverting amplifier to several inputs. Each input $V_1, V_2, V_3, \dots$ is applied through its own resistor $R_1, R_2, R_3, \dots$ to the common inverting $(-)$ node, which is a virtual ground; a single feedback resistor $R_f$ sets the overall scale, and the $(+)$ terminal is grounded.

Because the inverting node sits at $0\ \text{V}$ and draws no current, each input drives its own current $V_n/R_n$ into the node; these currents add and flow together through $R_f$. The result is a negative weighted sum:

Each input's weight is $R_f/R_n$, so choosing the resistors sets each coefficient independently. If all resistors are equal, $V_o=-(V_1+V_2+V_3)$, a perfect adder. Only one op-amp is needed for any number of inputs.

To design an adder for a required expression, equate coefficients: to realise $V_O=3V_1-2V_2+5.5V_3$ with $R_f=30\ \text{k}\Omega$, set $R_1=R_f/3=10\ \text{k}\Omega$, $R_2=R_f/2=15\ \text{k}\Omega$, $R_3=R_f/5.5\approx5.45\ \text{k}\Omega$, applying inputs with the correct polarity so the adder's own inversion delivers the wanted signs. This weighted-summing action is the basis of audio mixers and of weighted-resistor digital-to-analog converters.