Q.Show that the function f defined by f(x)=∣1−x+∣x∣∣, where x is any real number, is a continuous function.
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Continuity At A Point — a function is continuous at x=a if limx→af(x)=f(a). We check this for all real x.
Step 1: Simplify the inner expression.
Recall ∣x∣=x for x≥0 and ∣x∣=−x for x<0.
So 1−x+∣x∣ becomes:
- For x≥0: 1−x+x=1
- For x<0: 1−x−x=1−2x
Step 2: Write f(x) piecewise.
f(x)={∣1∣=1,∣1−2x∣,x≥0x<0
For x<0, 1−2x>0 (since x<0 gives −2x>0), so ∣1−2x∣=1−2x.
Thus:
f(x)={1,1−2x,x≥0x<0
Step 3: Check continuity at the only potential trouble point, x=0. …
The key idea is to simplify the nested absolute value by splitting the real line into two intervals based on the sign of x. Once simplified, f(x) becomes a piecewise polynomial (constant and linear pieces), and each piece is continuous on its interval. Checking the meeting point x=0 shows the left and right limits equal the function value, so f is continuous everywhere.
We need to show that f(x)=∣1−x+∣x∣∣ is continuous for all real x. The function involves an absolute value inside another absolute value. The standard way to handle such nested absolute values is to remove them by considering the cases where the inner expression changes sign.
The innermost absolute value is ∣x∣, which changes behaviour at x=0. So we split the domain into x≥0 and x<0.
- Case 1: x≥0 Here ∣x∣=x. Substitute into f:
f(x)=∣1−x+x∣=∣1∣=1.
So for all x≥0, f(x)=1, a constant function. Constant functions are continuous everywhere on their domain.
- Case 2: x<0 Here ∣x∣=−x. Substitute:
f(x)=∣1−x+(−x)∣=∣1−2x∣.
Now we have ∣1−2x∣. This absolute value changes sign when 1−2x=0, i.e., x=21. But note: we are in the region x<0, and 21>0, so the point x=21 is not in this region. Therefore, for all x<0, the expression 1−2x is always positive (since x is negative, −2x is positive, so 1−2x>1>0). Hence:
∣1−2x∣=1−2x.
So for x<0, f(x)=1−2x, a linear polynomial. Linear functions are continuous everywhere on their domain.
- Check continuity at the boundary x=0 The function is defined piecewise:
f(x)={1−2x,1,x<0,x≥0.
At x=0, we compute: …
Method: Simplifying a Nested Absolute Value by Case-Splitting on Sign, Then Testing Continuity
This method applies whenever a function contains one or more absolute values, and you need to first remove them (by splitting into cases) before the piece can be analysed for continuity.
Steps
Step 1: Work from the innermost absolute value outward.
Identify the expression inside the innermost ∣⋅∣ and find where it changes sign — for ∣x∣, that's at x=0. Split the real line into the regions where that inner expression is ≥0 and <0.
Step 2: Substitute the correct sign rule into the outer expression, one region at a time.
For each region, replace the inner absolute value with +(expression) or −(expression) as appropriate, and simplify what remains inside any outer absolute value signs.
Step 3: Within each region, check whether the new, simplified inner quantity changes sign inside that region. …
Common Mistakes
Mistake 1: Removing the outer absolute value bars using the sign of the original variable, instead of the sign of the simplified expression actually inside those bars.
Why it's wrong: after substituting the inner absolute value's sign rule, the expression inside the outer bars is a different expression (e.g. 1−2x, not x itself) — its own sign, in the current region, is what determines how to remove the outer bars, not the sign of x. Correct approach: after each substitution, explicitly re-check the sign of the new expression within that region before removing the next layer of absolute value.
Mistake 2: Assuming the newly-simplified expression's zero must fall inside the current region.
Why it's wrong: a sign-change point found by solving (e.g.) 1−2x=0 can land outside the region under consideration (x=21 is not in x<0) — treating it as a further internal split point when it isn't creates a false extra "piece" that doesn't actually exist. Correct approach: always check whether the computed zero actually lies within the current region before splitting further. …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.Let f(x)=⎩⎨⎧0,2−x,2,21−x,2−3,x=0for 0<x<1for x=1for 1<x<2for x≥2 then which of the following is true (A) f is right continuous at x=0 (B) f is left continuous at x=1 (C) f is right continuous at x=1 (D) f is continuous at x=2
›Reveal solutionSolution
Compute the left-hand limit, right-hand limit, and function value at each candidate point and compare; only at x=2 do all three coincide.
Concept and Intuition
A function is continuous at a point if the left-hand limit, right-hand limit, and the function's value there all agree. "Right continuous" only needs the right-hand limit to equal the function value; "left continuous" only needs the left-hand limit to match.
Step-by-Step Solution
- At x=0: f(0)=0. Right-hand limit: limx→0+(2−x)=2. Since 2=0, f is not right continuous at 0 — (A) is false.
- At x=1: f(1)=2. Left-hand limit: limx→1−(2−x)=1. Since 1=2, not left continuous — (B) is false. Right-hand limit: limx→1+(21−x)=−21. Since −21=2, not right continuous either — (C) is false. …
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.Which one of the following function is discontinuous at x=1? (A) f(x)=sin2x+tan2x+cos2x−sec2x (B) f(x)=1+2sinx1 (C) f(x)=⎩⎨⎧∣x−1∣+2(x−1)2x−1,1,x=1x=1 (D) f(x)=ex+5
›Reveal solutionSolution
Options (A), (B), (D) simplify to functions that are continuous everywhere; option (C)'s one-sided limits at x=1 disagree (+1 from the right, −1 from the left), so it alone is discontinuous at x=1.
Concept and Intuition
For piecewise/rational-looking expressions, check whether the identity sin2x+cos2x=1 and sec2x−tan2x=1 collapse them to constants (continuous), whether a denominator can vanish, and — for absolute-value expressions — whether the left and right limits genuinely agree.
Step-by-Step Solution
- (A) f(x)=sin2x+tan2x+cos2x−sec2x=(sin2x+cos2x)−(sec2x−tan2x)=1−1=0 for all x where tan,sec are defined; at x=1 (radian) cos1=0, so it's fine and continuous (≡0 near x=1).
- (B) f(x)=1+2sinx1: since 2sinx>0 always, the denominator never vanishes (≥1+2−1=1.5); continuous everywhere, including x=1.
- (C) For x=1, let t=x−1: f=∣t∣+2t2t.
- As t→0+ (x→1+): ∣t∣=t, so f=t+2t2t=1+2t1→1.
- As t→0− (x→1−): ∣t∣=−t, so f=−t+2t2t=−1+2t1→−1. …
- AP EAPCET 2022Set eng-2022-07-04-AN1 markMCQQ.Let f(x)=⎩⎨⎧∣x∣1,ax2+b,for ∣x∣>1for ∣x∣≤1. If x→1limf(x) and x→−1limf(x) exist, then the possible values for a and b are (A) a=b=1 (B) a=−21,b=−23 (C) a=23,b=−21 (D) a=21,b=−23
›Reveal solutionSolution
Both one-sided limits at x=±1 force a+b=1; checking the options, only a=23,b=−21 satisfies this.
Concept and Intuition
The function is piecewise, switching definition exactly at ∣x∣=1. For the limit to exist at a switch-point, the two pieces must approach the same value from either side — this is the usual "match the boundary values" condition for piecewise functions.
Step-by-Step Solution
- Near x=1: for x slightly less than 1 we're in the ax2+b branch (∣x∣≤1); for x slightly more than 1 we're in the 1/∣x∣ branch.
- Left limit: a(1)2+b=a+b.
- Right limit: ∣1∣1=1.
- Condition: a+b=1.
- Near x=−1: for x slightly less than −1 (i.e. ∣x∣>1), branch is 1/∣x∣; for x slightly more than −1 (i.e. ∣x∣<1), branch is ax2+b.
- Left limit: 1/∣−1∣=1.
- Right limit: a(−1)2+b=a+b.
- Condition: a+b=1 (same equation again). …
- Near x=1: for x slightly less than 1 we're in the ax2+b branch (∣x∣≤1); for x slightly more than 1 we're in the 1/∣x∣ branch.
- AP EAPCET 2024Set eng-2024-05-20-AN1 markMCQQ.The values of a and b for which the function f(x)=⎩⎨⎧1+∣sinx∣a/∣sinx∣,b,etan2x/tan3x,6−π<x<0x=00<x<6π is continuous at x=0 are (A) a=1,b=32 (B) a=32,b=e2/3 (C) a=32,b=23 (D) a=−1,b=e2/3
›Reveal solutionSolution
Both one-sided limits must equal b; the right side gives e2/3 directly, and the left side (a (1+u)1/u→e-type limit) matches it when a=2/3 — (B).
Concept and Intuition
Continuity at x=0 requires x→0−limf(x)=f(0)=x→0+limf(x). The right branch is a standard eratio of small angles limit, and the left branch is the classical exponential limit (1+u)1/u→e as u→0, raised to a power a.
Step-by-Step Solution
- Right-hand limit: as x→0+, tan2x≈2x and tan3x≈3x, so tan3xtan2x→32. Hence x→0+limetan2x/tan3x=e2/3.
- Left-hand limit: let u=∣sinx∣→0+ as x→0−. The left branch is (1+u)a/u=[(1+u)1/u]a. Since (1+u)1/u→e, this tends to ea.
- For continuity: left limit = right limit =f(0)=b, i.e. ea=e2/3=b. …
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If f:R→R defined by f(x)=⎩⎨⎧xsinx−sin2x,x3/2x2+x−x,x<0x>0 is continuous on R, then f(0)= (A) 1/2 (B) 3/2 (C) 1 (D) −1
›Reveal solutionSolution
This tests continuity of a piecewise function at the junction point using standard small-x approximations; both one-sided limits equal 1/2.
Concept and Intuition
A piecewise function is continuous at a boundary point only if the left-hand limit, right-hand limit, and the defined value at that point all agree. Here f(0) isn't given directly by either branch (both blow up as 0/0), so we must compute the limits from each side and set f(0) equal to their common value.
Step-by-Step Solution
- Left-hand limit (x→0−):
limx→0−xsinx−sin(x/2)
Use the small-angle expansion sint=t−6t3+⋯:
sinx−sin2x=(x−6x3)−(2x−48x3)+⋯=2x+O(x3)
Dividing by x: the limit is 21.
- Right-hand limit (x→0+):
limx→0+x3/2x2+x−x=limx→0+x3/2x(x+1−1)=limx→0+xx+1−1
Using 1+x≈1+2x−8x2+⋯:
xx+1−1≈xx/2=21 …
- AP EAPCET 2024Set eng-2024-05-20-FN1 markMCQQ.If a function f(x)=⎩⎨⎧xtan((α+1)x)+tan2xβx3sin3x−tan3xif x>0at x=0if x<0 is continuous at x=0 then ∣α∣+∣β∣= (A) 60 (B) 30 (C) 15 (D) 45
›Reveal solutionSolution
Continuity at x=0 forces both one-sided limits to equal β=f(0); compute each limit via small-angle expansions and solve for α,β.
Concept and Intuition
For a piecewise function to be continuous at a point, the left-hand limit, the right-hand limit, and the function's value there must all agree. Here both one-sided limits are 0/0-type indeterminate forms requiring standard small-x expansions of tan and sin.
Step-by-Step Solution
- Right-hand limit (x→0+): using limx→0tan(kx)/x=k, limx→0+xtan((α+1)x)+tan2x=(α+1)+2=α+3. This must equal β: β=α+3.
- Left-hand limit (x→0−): expand sin3x≈3x−6(3x)3=3x−4.5x3 and tan3x≈3x+3(3x)3=3x+9x3.
- sin3x−tan3x≈(3x−4.5x3)−(3x+9x3)=−13.5x3=−227x3.
- So limx→0−x3sin3x−tan3x=−227. This must also equal β: β=−227. …
- AP EAPCET 2025Set eng-2025-05-23-AN1 markMCQQ.If a real valued function f(x)=⎩⎨⎧(1+sinx)cosecx,a,ae2/x+be3/xe2/x+e3/x,−π/2<x<0x=00<x<π/2 is continuous at x = 0, then ab= (A) e (B) e2 (C) 1 (D) −1
›Reveal solutionSolution
The left-hand limit is the classical 1∞ form giving e, fixing a=e;
the right-hand limit needs dividing by the dominant exponential to fix b.
Continuity forces both, and ab=1.
Concept and Intuition
A piecewise function is continuous at a point only if the left-hand limit,
right-hand limit, and the function's value there all agree. Here the left
piece is a 1∞ indeterminate form (standard trick: exponentiate and use
log(1+u)∼u), and the right piece is a ratio of two exponentials growing at
different rates as x→0+ (since 1/x→+∞), so the faster-growing
exponential e3/x dominates and everything else becomes negligible after
dividing through by it.
Step-by-Step Solution
- Left limit: L=limx→0−(1+sinx)cosecx. Take logs: logL=limcosecx⋅log(1+sinx)=limsinxsinx(1+O(sinx))→1. So L=e. Continuity requires f(0)=a=L=e.
- Right limit: R=limx→0+ae2/x+be3/xe2/x+e3/x. Divide numerator and denominator by e3/x: R=limx→0+ae−1/x+be−1/x+1. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=x2cos4x−1, x=0 and f(0)=2 is a real valued function, then (A) x→0limf(x) does not exist (B) x→0limf(x)=1 (C) f is not continuous at x = 0 (D) f is continuous at x = 0
›Reveal solutionSolution
This tests factoring cos4x−1 and using the standard limit xsinx→1; the limit exists and equals −2, but f(0)=2, so f fails continuity at 0.
Concept and Intuition
cos4x−1 factors as a difference of squares twice: cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1). This lets us isolate the familiar (xsinx)2→1 building block.
Step-by-Step Solution
- cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1).
- f(x)=x2−sin2x(cos2x+1)=−(xsinx)2(cos2x+1).
- As x→0: (xsinx)2→1 and cos2x+1→2.
- So x→0limf(x)=−1×2=−2 — this limit exists (rules out (A)) and is not 1 (rules out (B)). …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=⎩⎨⎧2−xx2−4,a,log(x−2),for x<2for x=2for x>2 is a real valued function and 'a' is a finite real number, then (A) f is continuous at x = 2 when a = 0 (B) f is left continuous at x = 2 when a = 0 (C) f is right continuous at x = 2 when a = log 2 (D) f is not continuous at x = 1
›Reveal solutionSolution
This tests one-sided limits at a piecewise junction; the left-hand limit at x=2 is 0 while the right-hand limit diverges to −∞, so option (B) is the only correct statement.
Concept and Intuition
For left continuity at x=2 we only need limx→2−f(x)=f(2); the behaviour on the other side is irrelevant. Since log(x−2)→−∞ as x→2+, no finite value of a can make f right-continuous or fully continuous at x=2 — so those statements must be false.
Step-by-Step Solution
- Left-hand limit: let x=2−h, h→0+. Then x2−4=(2−h)2−4=h2−4h=h(h−4) and 2−x=h.
- So 2−xx2−4=hh(h−4)=h(h−4)→0⋅(−4)=0.
- Left continuity at x=2 requires f(2)=a to equal this limit, i.e. a=0. So (B) is true.
- Right-hand limit: as x→2+, x−2→0+, so log(x−2)→−∞ — unbounded, so no finite a (in particular a=log2) can match it. So (C) is false, and (A) (needing both sides equal) is also false. …
- AP EAPCET 2024Set eng-2024-05-19-AN1 markMCQQ.The function f(x)=⎩⎨⎧5−x2,5−x,x<3x≥3 is (A) left discontinuous at x=3 (B) left continuous at x=3 (C) right discontinuous at x=5 (D) discontinuous at x=5
›Reveal solutionSolution
Checking the one-sided limits at the junction x=3 shows the function jumps from 1 to 2 on approach from the left, i.e. it is left-discontinuous (but right-continuous) at x=3; there is nothing special happening at x=5.
Concept and Intuition
A piecewise function can fail to be continuous from only one side at a junction point if the junction point itself is included in one branch. Here x=3 is the boundary, and it belongs to the 5−x branch (since that branch is defined for x≥3), so we must check whether the other branch's limit (from the left) agrees with the actual function value.
Step-by-Step Solution
- Function value at x=3: since x≥3 uses f(x)=5−x, f(3)=5−3=2.
- Left-hand limit as x→3−: uses f(x)=5−x2, so limx→3−5−x2=5−32=1.
- Since LHL =1=f(3)=2, the function is discontinuous when approached from the left — i.e. left discontinuous at x=3.
- Right-hand limit as x→3+: still 5−x→2=f(3), so it is right-continuous at x=3 — this rules out "left continuous" (option B, false). …
- AP EAPCET 2024Set eng-2024-05-21-AN1 markMCQQ.If the function f(x)=x1+x−1 is continuous at x=0 then f(0)= (A) −21 (B) 31 (C) 21 (D) −31
›Reveal solutionSolution
Rationalizing the numerator turns the 0/0 form into a simple limit, which must equal f(0) for continuity.
Concept and Intuition
For f to be continuous at x=0, we need f(0)=x→0limf(x). Since the given formula for f(x) is 0/0 at x=0, we must simplify it algebraically first.
Step-by-Step Solution
- x1+x−1=x(1+x+1)(1+x−1)(1+x+1)=x(1+x+1)(1+x)−1=x(1+x+1)x=1+x+11.
- As x→0: 1+11=21. …
- AP EAPCET 2023Set eng-2023-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧x−2x−[x],b,a(2+x−x2)∣x2−x−2∣,2a−b,x>2x=2−1<x≤2x≤−1 is continuous on R, then x→0limx2sin2ax+xtanbx= (A) 0 (B) 1 (C) 2 (D) 3
›Reveal solutionSolution
Continuity of the piecewise function pins down a=1,b=1; substituting these into the limit expression and using standard small-angle limits gives 2.
Concept and Intuition
For a piecewise function to be continuous at a junction point, the one-sided limits and the defined value there must all agree. Here the junctions at x=2 and x=−1 give the equations needed to solve for the unknown constants a,b before the actual limit can be evaluated.
Step-by-Step Solution
- Right limit at x=2: for x slightly >2, [x]=2, so f(x)=x−2x−2=1. So limx→2+f(x)=1.
- Left limit at x=2 (third piece): x2−x−2=(x−2)(x+1) and 2+x−x2=−(x−2)(x+1). For x near 2−: (x−2)<0,(x+1)>0, so ∣x2−x−2∣=(2−x)(x+1) and 2+x−x2=(2−x)(x+1) too. So the ratio simplifies to a1 throughout (−1,2).
- Continuity at x=2: 1=b=a1⇒a=1, b=1.
- Check at x=−1: piece 4 value =2a−b=2−1=1; piece 3's limit as x→−1+ is also a1=1. Consistent ✓. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.