Q.Determine if f defined by f(x)={x2sinx1,0,if x=0if x=0 is a continuous function?
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Continuity At A Point — A function f is continuous at x=a if limx→af(x)=f(a).
We check continuity at x=0 (the only possible trouble point).
Step 1: f(0)=0 by definition.
Step 2: For x=0, ∣f(x)∣=x2sinx1≤x2, since ∣sin(1/x)∣≤1.
Step 3: As x→0, x2→0, so by the Squeeze Theorem, limx→0f(x)=0. …
The function f(x)=x2sin(1/x) for x=0 and f(0)=0 is continuous at every real number, including x=0, because the limit as x→0 equals the function value 0. The final answer is yes, f is continuous on R.
The Core Idea: Continuity at a Point
Continuity at a point x=a means three things must hold:
- f(a) is defined.
- limx→af(x) exists.
- limx→af(x)=f(a).
For this function, the only point where things could go wrong is x=0, because that's where the definition changes. Everywhere else (x=0), f is a product of a polynomial (x2) and a composition of continuous functions (sin(1/x) is continuous for x=0). So continuity for x=0 is immediate.
The real drama — and the beauty of this problem — is at x=0. Here, f(0)=0 is given. The question is: does limx→0x2sin(1/x) exist, and if so, does it equal 0?
Step-by-Step Solution
1. Recognize the "squeeze" situation.
The term sin(1/x) oscillates wildly as x→0 — it doesn't settle down to any single value. But it is bounded: for any x=0,
−1≤sin(x1)≤1.
This boundedness is the key. Multiply by x2, which does approach 0 as x→0. The product of something that goes to zero and something that stays bounded must also go to zero.
2. Set up the inequality.
For all x=0,
0≤∣f(x)∣=x2sinx1=x2sinx1≤x2⋅1=x2.
The absolute value trick is standard: instead of dealing with the oscillating sign of sin(1/x), we bound its magnitude. This lets us use the Squeeze Theorem cleanly.
3. Apply the Squeeze Theorem.
We know limx→00=0 and limx→0x2=0. Since ∣f(x)∣ is sandwiched between 0 and x2, the Squeeze Theorem gives:
limx→0∣f(x)∣=0.
Squeeze Theorem: If g(x)≤f(x)≤h(x) for all x near a (except possibly at a), and limx→ag(x)=limx→ah(x)=L, then limx→af(x)=L.
4. From absolute value to the function itself. …
Method: Proving Continuity at a Point Using the Squeeze (Sandwich) Theorem
Use this when a function is defined piecewise with a factor like sin(1/x) or cos(1/x) that oscillates without settling to a single value as x→0, multiplied by a factor that shrinks to zero — direct substitution does not work, but bounding the oscillating part does.
Steps
Step 1: Recognise the obstruction
The function contains a term like sin(1/x) that has no limit as x→0 (it oscillates between −1 and 1 infinitely often). You cannot evaluate limx→0f(x) by plugging in directly, because sin(1/x) itself isn't even defined at x=0.
Step 2: Bound the oscillating factor
Use the universal bound −1≤sin(anything)≤1 to write
∣f(x)∣=x2sinx1=x2sinx1≤x2
turning an unpredictable oscillation into a clean inequality.
Step 3: Apply the Squeeze Theorem
0≤∣f(x)∣≤x2,limx→00=0, limx→0x2=0⟹limx→0∣f(x)∣=0 …
Common Mistakes
Mistake 1: Concluding the limit doesn't exist because sin(1/x) itself has no limit
Why it's wrong: this ignores the effect of the x2 factor multiplying it — a bounded oscillating quantity multiplied by something shrinking to zero is forced to zero, even though the oscillating factor alone never settles down. Correct approach: always check whether an oscillating term is being multiplied by a vanishing factor before declaring "no limit" — that's exactly when the Squeeze Theorem applies.
Mistake 2: Trying to compute limx→0sin(1/x) directly instead of bounding it …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If f:R→R defined by f(x)=⎩⎨⎧xsinx−sin2x,x3/2x2+x−x,x<0x>0 is continuous on R, then f(0)= (A) 1/2 (B) 3/2 (C) 1 (D) −1
›Reveal solutionSolution
This tests continuity of a piecewise function at the junction point using standard small-x approximations; both one-sided limits equal 1/2.
Concept and Intuition
A piecewise function is continuous at a boundary point only if the left-hand limit, right-hand limit, and the defined value at that point all agree. Here f(0) isn't given directly by either branch (both blow up as 0/0), so we must compute the limits from each side and set f(0) equal to their common value.
Step-by-Step Solution
- Left-hand limit (x→0−):
limx→0−xsinx−sin(x/2)
Use the small-angle expansion sint=t−6t3+⋯:
sinx−sin2x=(x−6x3)−(2x−48x3)+⋯=2x+O(x3)
Dividing by x: the limit is 21.
- Right-hand limit (x→0+):
limx→0+x3/2x2+x−x=limx→0+x3/2x(x+1−1)=limx→0+xx+1−1
Using 1+x≈1+2x−8x2+⋯:
xx+1−1≈xx/2=21 …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=x2cos4x−1, x=0 and f(0)=2 is a real valued function, then (A) x→0limf(x) does not exist (B) x→0limf(x)=1 (C) f is not continuous at x = 0 (D) f is continuous at x = 0
›Reveal solutionSolution
This tests factoring cos4x−1 and using the standard limit xsinx→1; the limit exists and equals −2, but f(0)=2, so f fails continuity at 0.
Concept and Intuition
cos4x−1 factors as a difference of squares twice: cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1). This lets us isolate the familiar (xsinx)2→1 building block.
Step-by-Step Solution
- cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1).
- f(x)=x2−sin2x(cos2x+1)=−(xsinx)2(cos2x+1).
- As x→0: (xsinx)2→1 and cos2x+1→2.
- So x→0limf(x)=−1×2=−2 — this limit exists (rules out (A)) and is not 1 (rules out (B)). …
- AP EAPCET 2023Set eng-2023-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧x−2x−[x],b,a(2+x−x2)∣x2−x−2∣,2a−b,x>2x=2−1<x≤2x≤−1 is continuous on R, then x→0limx2sin2ax+xtanbx= (A) 0 (B) 1 (C) 2 (D) 3
›Reveal solutionSolution
Continuity of the piecewise function pins down a=1,b=1; substituting these into the limit expression and using standard small-angle limits gives 2.
Concept and Intuition
For a piecewise function to be continuous at a junction point, the one-sided limits and the defined value there must all agree. Here the junctions at x=2 and x=−1 give the equations needed to solve for the unknown constants a,b before the actual limit can be evaluated.
Step-by-Step Solution
- Right limit at x=2: for x slightly >2, [x]=2, so f(x)=x−2x−2=1. So limx→2+f(x)=1.
- Left limit at x=2 (third piece): x2−x−2=(x−2)(x+1) and 2+x−x2=−(x−2)(x+1). For x near 2−: (x−2)<0,(x+1)>0, so ∣x2−x−2∣=(2−x)(x+1) and 2+x−x2=(2−x)(x+1) too. So the ratio simplifies to a1 throughout (−1,2).
- Continuity at x=2: 1=b=a1⇒a=1, b=1.
- Check at x=−1: piece 4 value =2a−b=2−1=1; piece 3's limit as x→−1+ is also a1=1. Consistent ✓. …
- AP EAPCET 2023Set eng-2023-05-16-AN1 markMCQQ.If a function defined by f(x)=sinxlog(1+x)(3x−1)2, x=0, is continuous at x=0, then f(0)= (A) 2log3 (B) log32 (C) 2+log3 (D) (log3)2
›Reveal solutionSolution
Standard small-x equivalents give f(x)→(ln3)2 as x→0, so f(0)=(log3)2.
Concept and Intuition
For continuity at x=0, f(0) must equal limx→0f(x). Use the standard limits limx→0xax−1=lna, limx→0xsinx=1, limx→0xlog(1+x)=1.
Step-by-Step Solution
- (3x−1)2=x2(x3x−1)2→x2(ln3)2 as x→0.
- sinxlog(1+x)=x⋅xsinx⋅x⋅xlog(1+x)=x2⋅xsinx⋅xlog(1+x)→x2 as x→0.
- So f(x)=sinxlog(1+x)(3x−1)2→x2x2(ln3)2=(ln3)2. …
- AP EAPCET 2021Set eng-2021-08-20-AN1 markMCQQ.If f(x)=sinx3loge(1+x2(tanx)), x=0 is to be continuous at x=0, then f(0) must be equal to ______ (A) 1 (B) 0 (C) 21 (D) −1
›Reveal solutionSolution
Using the small-angle equivalences loge(1+u)∼u, tanx∼x, and sinx3∼x3 near x=0, the limit of f(x) works out to 1, so f(0)=1 is required for continuity.
Concept and Intuition
For a function to be continuous at a removable-looking point like x=0, its value there must be defined equal to the limit of the function as x→0. Standard small-x equivalences (loge(1+u)∼u for small u; tanx∼x; sinx∼x) let us evaluate the 00-type limit cleanly.
Step-by-Step Solution
- As x→0, let u=x2tanx. Since tanx∼x for small x, u∼x2⋅x=x3→0.
- Using loge(1+u)∼u for small u: loge(1+x2tanx)∼x2tanx∼x3.
- For the denominator, sin(x3)∼x3 as x→0 (since sinθ∼θ for small θ, here θ=x3→0).
- So f(x)=sin(x3)loge(1+x2tanx)→x3x3=1 as x→0. …
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.Let f(x)=⎩⎨⎧0,2−x,2,21−x,2−3,x=0for 0<x<1for x=1for 1<x<2for x≥2 then which of the following is true (A) f is right continuous at x=0 (B) f is left continuous at x=1 (C) f is right continuous at x=1 (D) f is continuous at x=2
›Reveal solutionSolution
Compute the left-hand limit, right-hand limit, and function value at each candidate point and compare; only at x=2 do all three coincide.
Concept and Intuition
A function is continuous at a point if the left-hand limit, right-hand limit, and the function's value there all agree. "Right continuous" only needs the right-hand limit to equal the function value; "left continuous" only needs the left-hand limit to match.
Step-by-Step Solution
- At x=0: f(0)=0. Right-hand limit: limx→0+(2−x)=2. Since 2=0, f is not right continuous at 0 — (A) is false.
- At x=1: f(1)=2. Left-hand limit: limx→1−(2−x)=1. Since 1=2, not left continuous — (B) is false. Right-hand limit: limx→1+(21−x)=−21. Since −21=2, not right continuous either — (C) is false. …
- AP EAPCET 2022Set eng-2022-07-06-FN1 markMCQQ.If f(x)=log(1+π2−4πx+4x2)(1−sinx) is continuous at x=π/2, then f(π/2)= (A) 41 (B) 81 (C) 161 (D) 321
›Reveal solutionSolution
Recognising 1+π2−4πx+4x2 as 1+(2x−π)2 turns this into a small-angle limit; the continuity value is 1/8.
Concept and Intuition
For f to be continuous at x=π/2, f(π/2) must equal limx→π/2f(x). The denominator's quadratic in x is a perfect "sum-of-squares" shift once you notice π2−4πx+4x2=(2x−π)2, turning this into a standard small-t limit using 1−cost≈t2/2 and log(1+u)≈u.
Step-by-Step Solution
- Rewrite the denominator: 1+π2−4πx+4x2=1+(2x−π)2.
- Let t=x−π/2, so x→π/2⟺t→0, and 2x−π=2t.
- Numerator: 1−sinx=1−sin(π/2+t)=1−cost. For small t, 1−cost≈2t2.
- Denominator: log(1+(2t)2)=log(1+4t2)≈4t2 for small t (since log(1+u)≈u). …
- AP EAPCET 2025Set eng-2025-05-27-FN1 markMCQQ.If the function f defined by f(x)=⎩⎨⎧x21−cos4x,a,16+x−4x,x<0x=0x>0 is continuous at x=0, then a= (A) 1 (B) 2 (C) 4 (D) 8
›Reveal solutionSolution
Continuity at x=0 requires the left limit, the right limit, and f(0)=a to all agree; both one-sided limits work out to 8. Answer: a=8.
Concept and Intuition
For a piecewise function to be continuous at a junction point, the value defined there (a) must equal both the limit approaching from the left and the limit approaching from the right. Each side here needs a standard trick: the trig side uses the double-angle identity 1−cosθ=2sin2(θ/2), and the surd side needs rationalisation to remove the − indeterminate form.
Step-by-Step Solution
- Left-hand limit (x→0−): 1−cos4x=2sin2(2x), so
limx→0−x21−cos4x=limx→0−x22sin2(2x)=2limx→0(2xsin2x)2⋅4=2⋅1⋅4=8.
- Right-hand limit (x→0+): rationalise 16+x−4x by multiplying top and bottom by 16+x+4: (16+x)−16x(16+x+4)=xx(16+x+4)=16+x+4. …
- AP EAPCET 2025Set eng-2025-05-21-AN1 markMCQQ.If a function f defined by f(x)=⎩⎨⎧x21−cos4x,a,16+x−4x,x<0x=0x>0 is continuous at x=0, then a= (A) 8 (B) 4 (C) 3 (D) 2
›Reveal solutionSolution
Both one-sided limits at x=0 evaluate to 8 (via 1−cosθ=2sin2(θ/2) on the left, and rationalizing on the right), so a=8.
Concept and Intuition
For f to be continuous at 0, the left-hand limit, right-hand limit, and f(0)=a must all agree. The left piece is a classic 0/0 trig limit solved via the half-angle identity for 1−cosθ; the right piece is a classic surd limit solved by rationalizing the denominator.
Step-by-Step Solution
- Left limit: 1−cos4x=2sin2(2x), so x21−cos4x=x22sin2(2x)=8(2xsin2x)2.
- As x→0−, 2xsin2x→1, so this limit →8(1)2=8.
- Right limit: let t=x (so t→0+ as x→0+): 16+x−4x=16+t−4t.
- Rationalize: multiply by 16+t+416+t+4: (16+t)−16t(16+t+4)=tt(16+t+4)=16+t+4. …
- AP EAPCET 2025Set eng-2025-05-23-AN1 markMCQQ.If a real valued function f(x)=⎩⎨⎧(1+sinx)cosecx,a,ae2/x+be3/xe2/x+e3/x,−π/2<x<0x=00<x<π/2 is continuous at x = 0, then ab= (A) e (B) e2 (C) 1 (D) −1
›Reveal solutionSolution
The left-hand limit is the classical 1∞ form giving e, fixing a=e;
the right-hand limit needs dividing by the dominant exponential to fix b.
Continuity forces both, and ab=1.
Concept and Intuition
A piecewise function is continuous at a point only if the left-hand limit,
right-hand limit, and the function's value there all agree. Here the left
piece is a 1∞ indeterminate form (standard trick: exponentiate and use
log(1+u)∼u), and the right piece is a ratio of two exponentials growing at
different rates as x→0+ (since 1/x→+∞), so the faster-growing
exponential e3/x dominates and everything else becomes negligible after
dividing through by it.
Step-by-Step Solution
- Left limit: L=limx→0−(1+sinx)cosecx. Take logs: logL=limcosecx⋅log(1+sinx)=limsinxsinx(1+O(sinx))→1. So L=e. Continuity requires f(0)=a=L=e.
- Right limit: R=limx→0+ae2/x+be3/xe2/x+e3/x. Divide numerator and denominator by e3/x: R=limx→0+ae−1/x+be−1/x+1. …
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.Which one of the following function is discontinuous at x=1? (A) f(x)=sin2x+tan2x+cos2x−sec2x (B) f(x)=1+2sinx1 (C) f(x)=⎩⎨⎧∣x−1∣+2(x−1)2x−1,1,x=1x=1 (D) f(x)=ex+5
›Reveal solutionSolution
Options (A), (B), (D) simplify to functions that are continuous everywhere; option (C)'s one-sided limits at x=1 disagree (+1 from the right, −1 from the left), so it alone is discontinuous at x=1.
Concept and Intuition
For piecewise/rational-looking expressions, check whether the identity sin2x+cos2x=1 and sec2x−tan2x=1 collapse them to constants (continuous), whether a denominator can vanish, and — for absolute-value expressions — whether the left and right limits genuinely agree.
Step-by-Step Solution
- (A) f(x)=sin2x+tan2x+cos2x−sec2x=(sin2x+cos2x)−(sec2x−tan2x)=1−1=0 for all x where tan,sec are defined; at x=1 (radian) cos1=0, so it's fine and continuous (≡0 near x=1).
- (B) f(x)=1+2sinx1: since 2sinx>0 always, the denominator never vanishes (≥1+2−1=1.5); continuous everywhere, including x=1.
- (C) For x=1, let t=x−1: f=∣t∣+2t2t.
- As t→0+ (x→1+): ∣t∣=t, so f=t+2t2t=1+2t1→1.
- As t→0− (x→1−): ∣t∣=−t, so f=−t+2t2t=−1+2t1→−1. …
- AP EAPCET 2026Set eng-2026-05-18-FN1 markMCQQ.If f(x) defined by f(x)=⎩⎨⎧4x−π1−tanx,k,x=4π,x∈[0,2π]x=4π is continuous in [0,2π], then k= (A) −1 (B) −21 (C) 21 (D) 1
›Reveal solutionSolution
Substituting x=π/4+h and using the tangent subtraction identity, the limit of
4x−π1−tanx as x→π/4 works out to −21, which is the required
value of k.
Concept and Intuition
For continuity at x=π/4, we need k=limx→π/4f(x). Since the expression is 0/0
at x=π/4, shifting variables via x=π/4+h (so h→0) turns tanx into
tan(π/4+h), which has a clean expansion using the tangent-addition formula.
Step-by-Step Solution
- Let x=4π+h, so h→0 as x→π/4.
- tan(4π+h)=1−tanh1+tanh.
- 1−tanx=1−1−tanh1+tanh=1−tanh(1−tanh)−(1+tanh)=1−tanh−2tanh
- 4x−π=4(4π+h)−π=4h.
- So
f(x)=4h(1−tanh)−2tanh
- As h→0, tanh∼h, so …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.