Q.Discuss the continuity of the function f, where f is defined by f(x)=⎩⎨⎧2x,0,4x,if x<0if 0≤x≤1if x>1
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Piecewise Function Continuity — check the function at the boundary points where the definition changes.
Step 1: At x=0
Left-hand limit: limx→0−f(x)=limx→0−2x=0
Right-hand limit: limx→0+f(x)=limx→0+0=0
Function value: f(0)=0
Since LHL = RHL = f(0), f is continuous at x=0.
Step 2: At x=1
Left-hand limit: limx→1−f(x)=limx→1−0=0
Right-hand limit: limx→1+f(x)=limx→1+4x=4
Function value: f(1)=0 …
We check continuity at the two potential breakpoints, x=0 and x=1, by comparing left-hand limits, right-hand limits, and the function value at each point. The function is continuous at x=0 but discontinuous at x=1 (the left-hand limit is 0, the right-hand limit is 4, and f(1)=0). So f is not continuous on R.
The question asks us to discuss the continuity of a piecewise function. A piecewise function is defined by different expressions on different intervals. The only places where continuity can break are at the boundaries where the expression changes — here, at x=0 and x=1. Everywhere else, each piece is a simple polynomial (2x, 0, or 4x), and polynomials are continuous on open intervals. So the entire job reduces to checking those two points.
For a function to be continuous at a point x=a, three things must hold:
- f(a) is defined.
- limx→af(x) exists (both one-sided limits must be equal).
- limx→af(x)=f(a).
We'll apply this to x=0 and x=1 separately.
1. Check continuity at x=0
The definition splits at 0: for x<0, f(x)=2x; for 0≤x≤1, f(x)=0.
-
Left-hand limit as x→0−:
For x just less than 0, we use f(x)=2x.
x→0−limf(x)=x→0−lim2x=2(0)=0.
-
Right-hand limit as x→0+:
For x just greater than 0 (but still less than 1), we use f(x)=0.
x→0+limf(x)=x→0+lim0=0.
-
Function value at x=0:
Since 0 falls in the interval 0≤x≤1, f(0)=0.
All three are 0, so the limit exists and equals the function value.
Conclusion: f is continuous at x=0.
Notice that the left-hand expression 2x approaches 0 smoothly, and the right-hand expression is already 0. The function doesn't jump at 0 — it's a seamless transition.
2. Check continuity at x=1
Here the definition splits again: for 0≤x≤1, f(x)=0; for x>1, f(x)=4x.
-
Left-hand limit as x→1−:
For x just less than 1 (but ≥0), we use f(x)=0.
x→1−limf(x)=x→1−lim0=0.
-
Right-hand limit as x→1+:
For x just greater than 1, we use f(x)=4x. …
Method: Distinguishing "Continuous at This Boundary" From "Continuous Everywhere"
This method is for functions with multiple pieces where different boundaries can behave differently — some continuous, some not — within the same function.
Steps
Step 1: Identify all switch points
Note every x-value where the piecewise rule changes; these are the only candidates for discontinuity, since each individual piece is continuous on its own open interval.
Step 2: Test the first boundary on its own
Compute f(a1), the left-hand limit, and the right-hand limit at that boundary using only the pieces that meet there. Reach a verdict (continuous or discontinuous) for that boundary alone.
Step 3: Test the next boundary independently …
Common Mistakes
Mistake 1: Treating the function as either "fully continuous" or "fully discontinuous" instead of testing each boundary separately
Why it's wrong: this function passes the continuity test at x=0 but fails it at x=1 — a single overall verdict for the whole function hides this genuinely mixed result. Correct approach: report continuity or discontinuity separately for each boundary point, not as one blanket statement for the entire function.
Mistake 2: At x=1, noting f(1)=0 matches the left-hand limit and stopping there …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2026Set eng-2026-05-12-FN1 markMCQQ.If a function f(x)=⎩⎨⎧tan2x2sin2x−cosbx,2,1−cosxsin2ax−sin2bx,for −2π<x<0for x=0for 0<x<2π is continuous at x=0, then a2+b2= (A) 9 (B) 9−log16 (C) 9−log8 (D) 1
›Reveal solutionSolution
Continuity at x=0 forces both one-sided limits to equal f(0)=2; expanding each piece to second order in x gives two equations in a2,b2 whose sum is 9−log16.
Concept and Intuition
A piecewise function is continuous at a boundary point exactly when the left-hand limit, right-hand limit, and the defined value all coincide. Here each branch is a 00-type expression as x→0, so we expand numerator and denominator to matching (second) order in x and read off the limiting constant.
Step-by-Step Solution
- Right piece, 0<x<π/2: f(x)=1−cosxsin2(ax)−sin2(bx). Using sinu≈u for small u: sin2(ax)−sin2(bx)≈a2x2−b2x2=(a2−b2)x2. Using 1−cosx≈2x2: limit =x2/2(a2−b2)x2=2(a2−b2). Continuity requires this =f(0)=2, so a2−b2=1. — (i)
- Left piece, −π/2<x<0: f(x)=tan2x2sin2x−cos(bx). 2sin2x=esin2xln2≈1+x2ln2 (using sin2x≈x2). cos(bx)≈1−2b2x2. Numerator ≈x2ln2+2b2x2=x2(ln2+2b2). Denominator tan2x≈x2. …
- AP EAPCET 2026Set eng-2026-05-14-FN1 markMCQQ.If f(x)=⎩⎨⎧(π−x)22+cosx−1,k,x=πx=π is continuous at x=π, then k= (A) 1 (B) 21 (C) 2 (D) 41
›Reveal solutionSolution
Continuity at x=π requires k to equal the limit of the given expression as x→π; using a small-angle substitution, that limit is 41.
Concept and Intuition
For f to be continuous at x=π, we need k=x→πlim(π−x)22+cosx−1. Substituting x=π−h (so h→0 as x→π) converts the trig limit into a small-h approximation problem, where standard expansions (cosh≈1−h2/2, 1+t≈1+t/2) make the limit easy to evaluate.
Step-by-Step Solution
- Let x=π−h, so as x→π, h→0, and π−x=h.
- cosx=cos(π−h)=−cosh.
- So 2+cosx=2−cosh. Using cosh≈1−2h2 for small h: 2−cosh≈2−1+2h2=1+2h2.
- 2+cosx≈1+2h2≈1+4h2 (using 1+t≈1+t/2 with t=h2/2).
- So 2+cosx−1≈4h2.
- The denominator is (π−x)2=h2. …
- AP EAPCET 2026Set eng-2026-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧(2+5x22+3x2)x28+3,k,for x=0for x=0 is a continuous function at x=0, then k= (A) e−2 (B) e−4 (C) e−8 (D) e−16
›Reveal solutionSolution
This tests the standard 1∞ exponential limit technique. Taking logs and expanding to first order in x2 gives k=e−8.
Concept and Intuition
Expressions of the form (base →1)power→∞ are evaluated by writing L=elim(power)⋅log(base) and expanding log(1+u)≈u for the small quantity u= base−1. The constant added to the exponent (here +3) never survives, since it multiplies a term that itself →0.
Step-by-Step Solution
- For continuity at x=0: k=limx→0(2+5x22+3x2)8/x2+3.
- Let L denote this limit. Then logL=limx→0(x28+3)log(2+5x22+3x2).
- Write the base as 1+u where u=2+5x22+3x2−1=2+5x2−2x2≈−x2 for small x (to leading order).
- log(1+u)≈u≈−x2 for small x. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=⎩⎨⎧2−xx2−4,a,log(x−2),for x<2for x=2for x>2 is a real valued function and 'a' is a finite real number, then (A) f is continuous at x = 2 when a = 0 (B) f is left continuous at x = 2 when a = 0 (C) f is right continuous at x = 2 when a = log 2 (D) f is not continuous at x = 1
›Reveal solutionSolution
This tests one-sided limits at a piecewise junction; the left-hand limit at x=2 is 0 while the right-hand limit diverges to −∞, so option (B) is the only correct statement.
Concept and Intuition
For left continuity at x=2 we only need limx→2−f(x)=f(2); the behaviour on the other side is irrelevant. Since log(x−2)→−∞ as x→2+, no finite value of a can make f right-continuous or fully continuous at x=2 — so those statements must be false.
Step-by-Step Solution
- Left-hand limit: let x=2−h, h→0+. Then x2−4=(2−h)2−4=h2−4h=h(h−4) and 2−x=h.
- So 2−xx2−4=hh(h−4)=h(h−4)→0⋅(−4)=0.
- Left continuity at x=2 requires f(2)=a to equal this limit, i.e. a=0. So (B) is true.
- Right-hand limit: as x→2+, x−2→0+, so log(x−2)→−∞ — unbounded, so no finite a (in particular a=log2) can match it. So (C) is false, and (A) (needing both sides equal) is also false. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=x2cos4x−1, x=0 and f(0)=2 is a real valued function, then (A) x→0limf(x) does not exist (B) x→0limf(x)=1 (C) f is not continuous at x = 0 (D) f is continuous at x = 0
›Reveal solutionSolution
This tests factoring cos4x−1 and using the standard limit xsinx→1; the limit exists and equals −2, but f(0)=2, so f fails continuity at 0.
Concept and Intuition
cos4x−1 factors as a difference of squares twice: cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1). This lets us isolate the familiar (xsinx)2→1 building block.
Step-by-Step Solution
- cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1).
- f(x)=x2−sin2x(cos2x+1)=−(xsinx)2(cos2x+1).
- As x→0: (xsinx)2→1 and cos2x+1→2.
- So x→0limf(x)=−1×2=−2 — this limit exists (rules out (A)) and is not 1 (rules out (B)). …
- AP EAPCET 2026Set eng-2026-05-18-FN1 markMCQQ.If f(x) defined by f(x)=⎩⎨⎧4x−π1−tanx,k,x=4π,x∈[0,2π]x=4π is continuous in [0,2π], then k= (A) −1 (B) −21 (C) 21 (D) 1
›Reveal solutionSolution
Substituting x=π/4+h and using the tangent subtraction identity, the limit of
4x−π1−tanx as x→π/4 works out to −21, which is the required
value of k.
Concept and Intuition
For continuity at x=π/4, we need k=limx→π/4f(x). Since the expression is 0/0
at x=π/4, shifting variables via x=π/4+h (so h→0) turns tanx into
tan(π/4+h), which has a clean expansion using the tangent-addition formula.
Step-by-Step Solution
- Let x=4π+h, so h→0 as x→π/4.
- tan(4π+h)=1−tanh1+tanh.
- 1−tanx=1−1−tanh1+tanh=1−tanh(1−tanh)−(1+tanh)=1−tanh−2tanh
- 4x−π=4(4π+h)−π=4h.
- So
f(x)=4h(1−tanh)−2tanh
- As h→0, tanh∼h, so …
- AP EAPCET 2025Set eng-2025-05-21-FN1 markMCQQ.If a real valued function f(x)=⎩⎨⎧x+3x2+(a+3)x+(a+1),−25,x=−3x=−3 is continuous at x=−3, then x→alim(x2+x+1)= (A) 47 (B) 25 (C) 74 (D) 52
›Reveal solutionSolution
This tests continuity of a rational function with a removable-type discontinuity: matching the limit to the given value pins down the parameter a, then the asked limit is a trivial polynomial evaluation. Answer: 47.
Concept and Intuition
A piecewise function is continuous at a point if the limit of the "elsewhere" formula, as x approaches that point, equals the value assigned at that point. Here the formula is a rational function whose denominator vanishes at x=−3; for the limit to exist (and be finite, matching −25), the numerator must also vanish there, so that (x+3) cancels — this is the standard "00 removable singularity" idea.
Step-by-Step Solution
- Continuity at x=−3 requires x→−3limx+3x2+(a+3)x+(a+1)=−25.
- Since the denominator →0, the numerator must vanish at x=−3 (else the limit is ±∞, not finite):
(−3)2+(a+3)(−3)+(a+1)=9−3a−9+a+1=1−2a=0⟹a=21.
- Check: with a=21, numerator =x2+27x+23. Factor out (x+3): x2+27x+23=(x+3)(x+21) (verify: (x+3)(x+21)=x2+21x+3x+23=x2+27x+23 ✓).
- So x→−3limx+3(x+3)(x+21)=−3+21=−25, matching the given value — confirming a=21. …
- AP EAPCET 2025Set eng-2025-05-21-AN1 markMCQQ.If a function f defined by f(x)=⎩⎨⎧x21−cos4x,a,16+x−4x,x<0x=0x>0 is continuous at x=0, then a= (A) 8 (B) 4 (C) 3 (D) 2
›Reveal solutionSolution
Both one-sided limits at x=0 evaluate to 8 (via 1−cosθ=2sin2(θ/2) on the left, and rationalizing on the right), so a=8.
Concept and Intuition
For f to be continuous at 0, the left-hand limit, right-hand limit, and f(0)=a must all agree. The left piece is a classic 0/0 trig limit solved via the half-angle identity for 1−cosθ; the right piece is a classic surd limit solved by rationalizing the denominator.
Step-by-Step Solution
- Left limit: 1−cos4x=2sin2(2x), so x21−cos4x=x22sin2(2x)=8(2xsin2x)2.
- As x→0−, 2xsin2x→1, so this limit →8(1)2=8.
- Right limit: let t=x (so t→0+ as x→0+): 16+x−4x=16+t−4t.
- Rationalize: multiply by 16+t+416+t+4: (16+t)−16t(16+t+4)=tt(16+t+4)=16+t+4. …
- AP EAPCET 2025Set eng-2025-05-23-AN1 markMCQQ.If a real valued function f(x)=⎩⎨⎧(1+sinx)cosecx,a,ae2/x+be3/xe2/x+e3/x,−π/2<x<0x=00<x<π/2 is continuous at x = 0, then ab= (A) e (B) e2 (C) 1 (D) −1
›Reveal solutionSolution
The left-hand limit is the classical 1∞ form giving e, fixing a=e;
the right-hand limit needs dividing by the dominant exponential to fix b.
Continuity forces both, and ab=1.
Concept and Intuition
A piecewise function is continuous at a point only if the left-hand limit,
right-hand limit, and the function's value there all agree. Here the left
piece is a 1∞ indeterminate form (standard trick: exponentiate and use
log(1+u)∼u), and the right piece is a ratio of two exponentials growing at
different rates as x→0+ (since 1/x→+∞), so the faster-growing
exponential e3/x dominates and everything else becomes negligible after
dividing through by it.
Step-by-Step Solution
- Left limit: L=limx→0−(1+sinx)cosecx. Take logs: logL=limcosecx⋅log(1+sinx)=limsinxsinx(1+O(sinx))→1. So L=e. Continuity requires f(0)=a=L=e.
- Right limit: R=limx→0+ae2/x+be3/xe2/x+e3/x. Divide numerator and denominator by e3/x: R=limx→0+ae−1/x+be−1/x+1. …
- AP EAPCET 2025Set eng-2025-05-24-FN1 markMCQQ.If f(x)=⎩⎨⎧sin2x(eax−1)log(1+x),2,tan2xcos4x−cosbx,if x>0if x=0if x<0 is continuous at x=0 then b2−a2= (A) 4 (B) 5 (C) 3 (D) 7
›Reveal solutionSolution
Continuity at x=0 forces both one-sided limits to equal f(0)=2; solving gives a=2, b2=20, so b2−a2=4.
Concept and Intuition
For f to be continuous at 0, we need x→0+limf(x)=x→0−limf(x)=f(0)=2. Each one-sided piece is a 0/0 form that resolves using the standard small-angle equivalences et−1∼t, log(1+t)∼t, sint∼t, tant∼t, and cost≈1−2t2.
Step-by-Step Solution
- Right-hand limit (x→0+): using eax−1∼ax, log(1+x)∼x, sin2x∼x2,
limx→0+sin2x(eax−1)log(1+x)=limx→0+x2(ax)(x)=a.
Setting this equal to f(0)=2: a=2.
2. Left-hand limit (x→0−): expand cos4x≈1−2(4x)2=1−8x2 and cos(bx)≈1−2b2x2, and tan2x∼x2:
cos4x−cos(bx)≈(1−8x2)−(1−2b2x2)=x2(2b2−8). …
- AP EAPCET 2025Set eng-2025-05-27-FN1 markMCQQ.If the function f defined by f(x)=⎩⎨⎧x21−cos4x,a,16+x−4x,x<0x=0x>0 is continuous at x=0, then a= (A) 1 (B) 2 (C) 4 (D) 8
›Reveal solutionSolution
Continuity at x=0 requires the left limit, the right limit, and f(0)=a to all agree; both one-sided limits work out to 8. Answer: a=8.
Concept and Intuition
For a piecewise function to be continuous at a junction point, the value defined there (a) must equal both the limit approaching from the left and the limit approaching from the right. Each side here needs a standard trick: the trig side uses the double-angle identity 1−cosθ=2sin2(θ/2), and the surd side needs rationalisation to remove the − indeterminate form.
Step-by-Step Solution
- Left-hand limit (x→0−): 1−cos4x=2sin2(2x), so
limx→0−x21−cos4x=limx→0−x22sin2(2x)=2limx→0(2xsin2x)2⋅4=2⋅1⋅4=8.
- Right-hand limit (x→0+): rationalise 16+x−4x by multiplying top and bottom by 16+x+4: (16+x)−16x(16+x+4)=xx(16+x+4)=16+x+4. …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.f(x)=⎩⎨⎧x+1(2x2−ax+1)−(ax2+3bx+2),k,if x=−1if x=−1 is a real valued function. If a,b,k∈R and f is continuous on R then k= (A) −31 (B) 6 (C) a−2 (D) a−3
›Reveal solutionSolution
Continuity at the removable-type point requires the numerator to vanish there (fixing b) and then simplifying the quotient to evaluate k as a limit. The answer is k=a−3.
Concept and Intuition
A rational expression x+1N(x) can only have a finite limit as x→−1 if N(−1)=0 (otherwise the limit is ±∞ and no choice of k can make f continuous there). So the first job is to use that vanishing condition to pin down any free constant, then simplify by cancelling the common factor.
Step-by-Step Solution
- Numerator: (2x2−ax+1)−(ax2+3bx+2)=(2−a)x2−(a+3b)x−1.
- At x=−1: (2−a)(1)+(a+3b)−1=1+3b. For the limit (hence continuity) to exist finitely, this must be 0: b=−31.
- With b=−1/3, numerator becomes (2−a)x2−(a−1)x−1.
- Factor out (x+1): writing (2−a)x2−(a−1)x−1=(x+1)[(2−a)x−1] (verified by expansion, matching all coefficients). …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.