Q.Find all points of discontinuity of f, where f is defined by f(x)={x∣x∣,0,if x=0if x=0
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Continuity At A Point — A function is continuous at x=a if limx→af(x)=f(a).
Step 1: For x=0, x∣x∣ equals 1 when x>0 and −1 when x<0.
Step 2: The left-hand limit at 0 is limx→0−f(x)=−1. The right-hand limit is limx→0+f(x)=1. Since these are unequal, limx→0f(x) does not exist. …
The function f(x) is discontinuous at x=0 because the left-hand limit (−1) and right-hand limit (+1) are different, and neither equals the function value f(0)=0. It is continuous everywhere else.
Why This Problem Matters
This is a classic "sign function" disguised in absolute-value clothing. The core idea is simple: continuity at a point means three things must match — the function value, the left-hand limit, and the right-hand limit. If any one of these is off, the function breaks at that point.
The trick here is that ∣x∣/x behaves differently depending on whether x is positive or negative. For x>0, ∣x∣=x, so the fraction is 1. For x<0, ∣x∣=−x, so the fraction is −1. That jump from −1 to 1 at x=0 is the whole story.
Step-by-Step Solution
1. Understand the definition of f
The function is piecewise-defined:
- For x=0: f(x)=x∣x∣
- For x=0: f(0)=0
The absolute value ∣x∣ is defined as:
∣x∣={x,−x,x≥0x<0
2. Simplify f(x) for x=0
- If x>0: ∣x∣=x, so f(x)=xx=1.
- If x<0: ∣x∣=−x, so f(x)=x−x=−1.
So the function is really:
f(x)=⎩⎨⎧−1,0,1,x<0x=0x>0
This is the signum function (sign function) with a twist: at x=0, it's defined as 0 instead of being undefined.
A common mistake is to think x∣x∣ simplifies to 1 for all x=0. It does not — the absolute value flips sign for negative inputs, giving −1 on the left side.
3. Check continuity at x=0 (the only potential trouble spot)
For any x=0, the function is constant (−1 or 1), so it's trivially continuous everywhere except possibly at x=0. We only need to examine x=0.
4. Compute the left-hand limit as x→0−
When x approaches 0 from the left (negative side), f(x)=−1 for all such x. Therefore:
limx→0−f(x)=−1
5. Compute the right-hand limit as x→0+
When x approaches 0 from the right (positive side), f(x)=1 for all such x. Therefore:
limx→0+f(x)=1
6. Compare the limits and the function value
We have:
- Left-hand limit: −1
- Right-hand limit: 1
- Function value at 0: f(0)=0 …
Method: Rewriting an Absolute-Value Formula, Then Applying the Three-Condition Test
This method applies whenever a function's formula contains an expression like ∣x∣ combined with x itself (e.g. x∣x∣ or ∣x∣x), since such a formula secretly hides a piecewise rule.
Steps
Step 1: Split the absolute value by the sign of x
Before doing anything else, rewrite ∣x∣ using its own definition:
∣x∣={x,−x,x≥0x<0
Substitute this into the given expression separately for x>0 and x<0 so the "hidden" piecewise structure becomes explicit.
Step 2: Identify the point where the rule changes
The sign of x only switches at x=0, so this is the only candidate for a discontinuity; on either side of 0 the simplified expression is a constant, which is automatically continuous.
Step 3: Apply the three-condition test at that point …
Common Mistakes
Mistake 1: Assuming x∣x∣ simplifies to 1 for every x=0
Why it's wrong: this forgets that ∣x∣=−x when x is negative, which flips the fraction to −1 on the left side of 0 — the value is not the same on both sides. Correct approach: split by the sign of x first (x>0 and x<0 separately), and simplify each branch on its own before drawing any conclusion.
Mistake 2: Plugging x=0 directly into x∣x∣ to "find" f(0) …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.Let f(x)=⎩⎨⎧0,2−x,2,21−x,2−3,x=0for 0<x<1for x=1for 1<x<2for x≥2 then which of the following is true (A) f is right continuous at x=0 (B) f is left continuous at x=1 (C) f is right continuous at x=1 (D) f is continuous at x=2
›Reveal solutionSolution
Compute the left-hand limit, right-hand limit, and function value at each candidate point and compare; only at x=2 do all three coincide.
Concept and Intuition
A function is continuous at a point if the left-hand limit, right-hand limit, and the function's value there all agree. "Right continuous" only needs the right-hand limit to equal the function value; "left continuous" only needs the left-hand limit to match.
Step-by-Step Solution
- At x=0: f(0)=0. Right-hand limit: limx→0+(2−x)=2. Since 2=0, f is not right continuous at 0 — (A) is false.
- At x=1: f(1)=2. Left-hand limit: limx→1−(2−x)=1. Since 1=2, not left continuous — (B) is false. Right-hand limit: limx→1+(21−x)=−21. Since −21=2, not right continuous either — (C) is false. …
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If f:R→R defined by f(x)=⎩⎨⎧xsinx−sin2x,x3/2x2+x−x,x<0x>0 is continuous on R, then f(0)= (A) 1/2 (B) 3/2 (C) 1 (D) −1
›Reveal solutionSolution
This tests continuity of a piecewise function at the junction point using standard small-x approximations; both one-sided limits equal 1/2.
Concept and Intuition
A piecewise function is continuous at a boundary point only if the left-hand limit, right-hand limit, and the defined value at that point all agree. Here f(0) isn't given directly by either branch (both blow up as 0/0), so we must compute the limits from each side and set f(0) equal to their common value.
Step-by-Step Solution
- Left-hand limit (x→0−):
limx→0−xsinx−sin(x/2)
Use the small-angle expansion sint=t−6t3+⋯:
sinx−sin2x=(x−6x3)−(2x−48x3)+⋯=2x+O(x3)
Dividing by x: the limit is 21.
- Right-hand limit (x→0+):
limx→0+x3/2x2+x−x=limx→0+x3/2x(x+1−1)=limx→0+xx+1−1
Using 1+x≈1+2x−8x2+⋯:
xx+1−1≈xx/2=21 …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=⎩⎨⎧2−xx2−4,a,log(x−2),for x<2for x=2for x>2 is a real valued function and 'a' is a finite real number, then (A) f is continuous at x = 2 when a = 0 (B) f is left continuous at x = 2 when a = 0 (C) f is right continuous at x = 2 when a = log 2 (D) f is not continuous at x = 1
›Reveal solutionSolution
This tests one-sided limits at a piecewise junction; the left-hand limit at x=2 is 0 while the right-hand limit diverges to −∞, so option (B) is the only correct statement.
Concept and Intuition
For left continuity at x=2 we only need limx→2−f(x)=f(2); the behaviour on the other side is irrelevant. Since log(x−2)→−∞ as x→2+, no finite value of a can make f right-continuous or fully continuous at x=2 — so those statements must be false.
Step-by-Step Solution
- Left-hand limit: let x=2−h, h→0+. Then x2−4=(2−h)2−4=h2−4h=h(h−4) and 2−x=h.
- So 2−xx2−4=hh(h−4)=h(h−4)→0⋅(−4)=0.
- Left continuity at x=2 requires f(2)=a to equal this limit, i.e. a=0. So (B) is true.
- Right-hand limit: as x→2+, x−2→0+, so log(x−2)→−∞ — unbounded, so no finite a (in particular a=log2) can match it. So (C) is false, and (A) (needing both sides equal) is also false. …
- AP EAPCET 2024Set eng-2024-05-20-AN1 markMCQQ.The values of a and b for which the function f(x)=⎩⎨⎧1+∣sinx∣a/∣sinx∣,b,etan2x/tan3x,6−π<x<0x=00<x<6π is continuous at x=0 are (A) a=1,b=32 (B) a=32,b=e2/3 (C) a=32,b=23 (D) a=−1,b=e2/3
›Reveal solutionSolution
Both one-sided limits must equal b; the right side gives e2/3 directly, and the left side (a (1+u)1/u→e-type limit) matches it when a=2/3 — (B).
Concept and Intuition
Continuity at x=0 requires x→0−limf(x)=f(0)=x→0+limf(x). The right branch is a standard eratio of small angles limit, and the left branch is the classical exponential limit (1+u)1/u→e as u→0, raised to a power a.
Step-by-Step Solution
- Right-hand limit: as x→0+, tan2x≈2x and tan3x≈3x, so tan3xtan2x→32. Hence x→0+limetan2x/tan3x=e2/3.
- Left-hand limit: let u=∣sinx∣→0+ as x→0−. The left branch is (1+u)a/u=[(1+u)1/u]a. Since (1+u)1/u→e, this tends to ea.
- For continuity: left limit = right limit =f(0)=b, i.e. ea=e2/3=b. …
- AP EAPCET 2024Set eng-2024-05-21-AN1 markMCQQ.If the function f(x)=x1+x−1 is continuous at x=0 then f(0)= (A) −21 (B) 31 (C) 21 (D) −31
›Reveal solutionSolution
Rationalizing the numerator turns the 0/0 form into a simple limit, which must equal f(0) for continuity.
Concept and Intuition
For f to be continuous at x=0, we need f(0)=x→0limf(x). Since the given formula for f(x) is 0/0 at x=0, we must simplify it algebraically first.
Step-by-Step Solution
- x1+x−1=x(1+x+1)(1+x−1)(1+x+1)=x(1+x+1)(1+x)−1=x(1+x+1)x=1+x+11.
- As x→0: 1+11=21. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=x2cos4x−1, x=0 and f(0)=2 is a real valued function, then (A) x→0limf(x) does not exist (B) x→0limf(x)=1 (C) f is not continuous at x = 0 (D) f is continuous at x = 0
›Reveal solutionSolution
This tests factoring cos4x−1 and using the standard limit xsinx→1; the limit exists and equals −2, but f(0)=2, so f fails continuity at 0.
Concept and Intuition
cos4x−1 factors as a difference of squares twice: cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1). This lets us isolate the familiar (xsinx)2→1 building block.
Step-by-Step Solution
- cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1).
- f(x)=x2−sin2x(cos2x+1)=−(xsinx)2(cos2x+1).
- As x→0: (xsinx)2→1 and cos2x+1→2.
- So x→0limf(x)=−1×2=−2 — this limit exists (rules out (A)) and is not 1 (rules out (B)). …
- AP EAPCET 2024Set eng-2024-05-19-AN1 markMCQQ.The function f(x)=⎩⎨⎧5−x2,5−x,x<3x≥3 is (A) left discontinuous at x=3 (B) left continuous at x=3 (C) right discontinuous at x=5 (D) discontinuous at x=5
›Reveal solutionSolution
Checking the one-sided limits at the junction x=3 shows the function jumps from 1 to 2 on approach from the left, i.e. it is left-discontinuous (but right-continuous) at x=3; there is nothing special happening at x=5.
Concept and Intuition
A piecewise function can fail to be continuous from only one side at a junction point if the junction point itself is included in one branch. Here x=3 is the boundary, and it belongs to the 5−x branch (since that branch is defined for x≥3), so we must check whether the other branch's limit (from the left) agrees with the actual function value.
Step-by-Step Solution
- Function value at x=3: since x≥3 uses f(x)=5−x, f(3)=5−3=2.
- Left-hand limit as x→3−: uses f(x)=5−x2, so limx→3−5−x2=5−32=1.
- Since LHL =1=f(3)=2, the function is discontinuous when approached from the left — i.e. left discontinuous at x=3.
- Right-hand limit as x→3+: still 5−x→2=f(3), so it is right-continuous at x=3 — this rules out "left continuous" (option B, false). …
- AP EAPCET 2025Set eng-2025-05-23-AN1 markMCQQ.If a real valued function f(x)=⎩⎨⎧(1+sinx)cosecx,a,ae2/x+be3/xe2/x+e3/x,−π/2<x<0x=00<x<π/2 is continuous at x = 0, then ab= (A) e (B) e2 (C) 1 (D) −1
›Reveal solutionSolution
The left-hand limit is the classical 1∞ form giving e, fixing a=e;
the right-hand limit needs dividing by the dominant exponential to fix b.
Continuity forces both, and ab=1.
Concept and Intuition
A piecewise function is continuous at a point only if the left-hand limit,
right-hand limit, and the function's value there all agree. Here the left
piece is a 1∞ indeterminate form (standard trick: exponentiate and use
log(1+u)∼u), and the right piece is a ratio of two exponentials growing at
different rates as x→0+ (since 1/x→+∞), so the faster-growing
exponential e3/x dominates and everything else becomes negligible after
dividing through by it.
Step-by-Step Solution
- Left limit: L=limx→0−(1+sinx)cosecx. Take logs: logL=limcosecx⋅log(1+sinx)=limsinxsinx(1+O(sinx))→1. So L=e. Continuity requires f(0)=a=L=e.
- Right limit: R=limx→0+ae2/x+be3/xe2/x+e3/x. Divide numerator and denominator by e3/x: R=limx→0+ae−1/x+be−1/x+1. …
- AP EAPCET 2023Set eng-2023-05-19-FN1 markMCQQ.If a function f(x) defined on [a,b] is discontinuous at x=α∈(a,b), then (A) x→α−limf(x)=x→α+limf(x)=f(α) (B) x→αlimf(x)=f(α) (C) x→a−limf(x)=f(a) (D) x→b+limf(x)=f(b)
›Reveal solutionSolution
Discontinuity at an interior point is, by definition, the failure of "limit equals function value" there.
Concept and Intuition
A function is continuous at α iff limx→αf(x)=f(α) (which subsumes both one-sided limits agreeing with each other and with f(α)). Discontinuity is simply the negation of this statement.
Step-by-Step Solution
- Continuity at α∈(a,b) means limx→α−f(x)=limx→α+f(x)=f(α) — this is option (A), which must be false since f is given to be discontinuous at α.
- The negation of continuity is exactly: the limit at α (however it behaves) is not equal to f(α) — option (B). …
- AP EAPCET 2021Set eng-2021-08-20-AN1 markMCQQ.If f(x)=sinx3loge(1+x2(tanx)), x=0 is to be continuous at x=0, then f(0) must be equal to ______ (A) 1 (B) 0 (C) 21 (D) −1
›Reveal solutionSolution
Using the small-angle equivalences loge(1+u)∼u, tanx∼x, and sinx3∼x3 near x=0, the limit of f(x) works out to 1, so f(0)=1 is required for continuity.
Concept and Intuition
For a function to be continuous at a removable-looking point like x=0, its value there must be defined equal to the limit of the function as x→0. Standard small-x equivalences (loge(1+u)∼u for small u; tanx∼x; sinx∼x) let us evaluate the 00-type limit cleanly.
Step-by-Step Solution
- As x→0, let u=x2tanx. Since tanx∼x for small x, u∼x2⋅x=x3→0.
- Using loge(1+u)∼u for small u: loge(1+x2tanx)∼x2tanx∼x3.
- For the denominator, sin(x3)∼x3 as x→0 (since sinθ∼θ for small θ, here θ=x3→0).
- So f(x)=sin(x3)loge(1+x2tanx)→x3x3=1 as x→0. …
- AP EAPCET 2022Set eng-2022-07-04-AN1 markMCQQ.Let f(x)=⎩⎨⎧∣x∣1,ax2+b,for ∣x∣>1for ∣x∣≤1. If x→1limf(x) and x→−1limf(x) exist, then the possible values for a and b are (A) a=b=1 (B) a=−21,b=−23 (C) a=23,b=−21 (D) a=21,b=−23
›Reveal solutionSolution
Both one-sided limits at x=±1 force a+b=1; checking the options, only a=23,b=−21 satisfies this.
Concept and Intuition
The function is piecewise, switching definition exactly at ∣x∣=1. For the limit to exist at a switch-point, the two pieces must approach the same value from either side — this is the usual "match the boundary values" condition for piecewise functions.
Step-by-Step Solution
- Near x=1: for x slightly less than 1 we're in the ax2+b branch (∣x∣≤1); for x slightly more than 1 we're in the 1/∣x∣ branch.
- Left limit: a(1)2+b=a+b.
- Right limit: ∣1∣1=1.
- Condition: a+b=1.
- Near x=−1: for x slightly less than −1 (i.e. ∣x∣>1), branch is 1/∣x∣; for x slightly more than −1 (i.e. ∣x∣<1), branch is ax2+b.
- Left limit: 1/∣−1∣=1.
- Right limit: a(−1)2+b=a+b.
- Condition: a+b=1 (same equation again). …
- Near x=1: for x slightly less than 1 we're in the ax2+b branch (∣x∣≤1); for x slightly more than 1 we're in the 1/∣x∣ branch.
- AP EAPCET 2023Set eng-2023-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧x−2x−[x],b,a(2+x−x2)∣x2−x−2∣,2a−b,x>2x=2−1<x≤2x≤−1 is continuous on R, then x→0limx2sin2ax+xtanbx= (A) 0 (B) 1 (C) 2 (D) 3
›Reveal solutionSolution
Continuity of the piecewise function pins down a=1,b=1; substituting these into the limit expression and using standard small-angle limits gives 2.
Concept and Intuition
For a piecewise function to be continuous at a junction point, the one-sided limits and the defined value there must all agree. Here the junctions at x=2 and x=−1 give the equations needed to solve for the unknown constants a,b before the actual limit can be evaluated.
Step-by-Step Solution
- Right limit at x=2: for x slightly >2, [x]=2, so f(x)=x−2x−2=1. So limx→2+f(x)=1.
- Left limit at x=2 (third piece): x2−x−2=(x−2)(x+1) and 2+x−x2=−(x−2)(x+1). For x near 2−: (x−2)<0,(x+1)>0, so ∣x2−x−2∣=(2−x)(x+1) and 2+x−x2=(2−x)(x+1) too. So the ratio simplifies to a1 throughout (−1,2).
- Continuity at x=2: 1=b=a1⇒a=1, b=1.
- Check at x=−1: piece 4 value =2a−b=2−1=1; piece 3's limit as x→−1+ is also a1=1. Consistent ✓. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.