Q.Find all points of discontinuity of f, where f is defined by f(x)={x3−3,x2+1,if x≤2if x>2
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Continuity At A Point — A function is continuous at x=a if limx→af(x)=f(a). For a piecewise function, the critical point is the boundary where the definition changes.
Here the boundary is x=2. We check the left-hand limit, right-hand limit, and the function value at x=2.
Step 1: Compute f(2). Since x≤2 uses the first piece,
f(2)=23−3=8−3=5.
Step 2: Find the left-hand limit as x→2− (using x3−3):
limx→2−f(x)=23−3=5.
Step 3: Find the right-hand limit as x→2+ (using x2+1): …
The function is defined by two different polynomials meeting at x=2. Continuity at that point requires the left-hand limit, right-hand limit, and f(2) to be equal. Since the left-hand limit equals f(2)=5 but the right-hand limit is 5 as well, the function is continuous at x=2 and therefore continuous everywhere on R.
The key idea: a piecewise function can only be discontinuous at the "break" points where the definition changes. Here, the only candidate is x=2. Everywhere else, f is a polynomial — and polynomials are continuous on their entire domain. So the entire question reduces to checking what happens at x=2.
Why check limits? Continuity at a point x=a means three things must hold simultaneously:
- f(a) is defined.
- limx→af(x) exists.
- That limit equals f(a).
For a piecewise function, the limit exists only if the left-hand limit and right-hand limit are equal. So we compute both sides at x=2.
- Find f(2). Since x=2 falls in the first piece (x≤2), we use f(x)=x3−3.
f(2)=23−3=8−3=5.
- Left-hand limit as x→2−. For x<2, the function is x3−3, a polynomial. Polynomials are continuous, so the limit is just the value at x=2:
limx→2−f(x)=limx→2−(x3−3)=23−3=5.
- Right-hand limit as x→2+. For x>2, the function is x2+1, also a polynomial. So:
limx→2+f(x)=limx→2+(x2+1)=22+1=4+1=5.
- Compare. Left-hand limit = 5, right-hand limit = 5, and f(2)=5. All three are equal. Therefore the limit exists and equals f(2). …
Method: Comparing Two Formulas at Their Shared Boundary
This is the standard approach for any function built from two different expressions meeting at a single switch-over point.
Steps
Step 1: Identify which formula defines the boundary point itself
Look at the inequality signs in the definition — whichever piece's inequality includes "=" is the one that determines f(a) at the boundary; the other piece is only used for the limit approaching from its side.
Step 2: Compute f(a) from the correct piece
Substitute a into the formula identified in Step 1.
Step 3: Compute the left-hand and right-hand limits separately …
Common Mistakes
Mistake 1: Using x2+1 instead of x3−3 to compute f(2)
Why it's wrong: the boundary condition is x≤2, so x=2 belongs to the first piece (x3−3), not the second. Correct approach: identify exactly which inequality includes the equals sign before evaluating f(a), and use only that piece.
Mistake 2: Stopping once the left-hand limit matches f(2), without also checking the right-hand limit …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.Let f(x)=⎩⎨⎧0,2−x,2,21−x,2−3,x=0for 0<x<1for x=1for 1<x<2for x≥2 then which of the following is true (A) f is right continuous at x=0 (B) f is left continuous at x=1 (C) f is right continuous at x=1 (D) f is continuous at x=2
›Reveal solutionSolution
Compute the left-hand limit, right-hand limit, and function value at each candidate point and compare; only at x=2 do all three coincide.
Concept and Intuition
A function is continuous at a point if the left-hand limit, right-hand limit, and the function's value there all agree. "Right continuous" only needs the right-hand limit to equal the function value; "left continuous" only needs the left-hand limit to match.
Step-by-Step Solution
- At x=0: f(0)=0. Right-hand limit: limx→0+(2−x)=2. Since 2=0, f is not right continuous at 0 — (A) is false.
- At x=1: f(1)=2. Left-hand limit: limx→1−(2−x)=1. Since 1=2, not left continuous — (B) is false. Right-hand limit: limx→1+(21−x)=−21. Since −21=2, not right continuous either — (C) is false. …
- AP EAPCET 2024Set eng-2024-05-19-AN1 markMCQQ.The function f(x)=⎩⎨⎧5−x2,5−x,x<3x≥3 is (A) left discontinuous at x=3 (B) left continuous at x=3 (C) right discontinuous at x=5 (D) discontinuous at x=5
›Reveal solutionSolution
Checking the one-sided limits at the junction x=3 shows the function jumps from 1 to 2 on approach from the left, i.e. it is left-discontinuous (but right-continuous) at x=3; there is nothing special happening at x=5.
Concept and Intuition
A piecewise function can fail to be continuous from only one side at a junction point if the junction point itself is included in one branch. Here x=3 is the boundary, and it belongs to the 5−x branch (since that branch is defined for x≥3), so we must check whether the other branch's limit (from the left) agrees with the actual function value.
Step-by-Step Solution
- Function value at x=3: since x≥3 uses f(x)=5−x, f(3)=5−3=2.
- Left-hand limit as x→3−: uses f(x)=5−x2, so limx→3−5−x2=5−32=1.
- Since LHL =1=f(3)=2, the function is discontinuous when approached from the left — i.e. left discontinuous at x=3.
- Right-hand limit as x→3+: still 5−x→2=f(3), so it is right-continuous at x=3 — this rules out "left continuous" (option B, false). …
- AP EAPCET 2025Set eng-2025-05-21-FN1 markMCQQ.If a real valued function f(x)=⎩⎨⎧x+3x2+(a+3)x+(a+1),−25,x=−3x=−3 is continuous at x=−3, then x→alim(x2+x+1)= (A) 47 (B) 25 (C) 74 (D) 52
›Reveal solutionSolution
This tests continuity of a rational function with a removable-type discontinuity: matching the limit to the given value pins down the parameter a, then the asked limit is a trivial polynomial evaluation. Answer: 47.
Concept and Intuition
A piecewise function is continuous at a point if the limit of the "elsewhere" formula, as x approaches that point, equals the value assigned at that point. Here the formula is a rational function whose denominator vanishes at x=−3; for the limit to exist (and be finite, matching −25), the numerator must also vanish there, so that (x+3) cancels — this is the standard "00 removable singularity" idea.
Step-by-Step Solution
- Continuity at x=−3 requires x→−3limx+3x2+(a+3)x+(a+1)=−25.
- Since the denominator →0, the numerator must vanish at x=−3 (else the limit is ±∞, not finite):
(−3)2+(a+3)(−3)+(a+1)=9−3a−9+a+1=1−2a=0⟹a=21.
- Check: with a=21, numerator =x2+27x+23. Factor out (x+3): x2+27x+23=(x+3)(x+21) (verify: (x+3)(x+21)=x2+21x+3x+23=x2+27x+23 ✓).
- So x→−3limx+3(x+3)(x+21)=−3+21=−25, matching the given value — confirming a=21. …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.f(x)=⎩⎨⎧x+1(2x2−ax+1)−(ax2+3bx+2),k,if x=−1if x=−1 is a real valued function. If a,b,k∈R and f is continuous on R then k= (A) −31 (B) 6 (C) a−2 (D) a−3
›Reveal solutionSolution
Continuity at the removable-type point requires the numerator to vanish there (fixing b) and then simplifying the quotient to evaluate k as a limit. The answer is k=a−3.
Concept and Intuition
A rational expression x+1N(x) can only have a finite limit as x→−1 if N(−1)=0 (otherwise the limit is ±∞ and no choice of k can make f continuous there). So the first job is to use that vanishing condition to pin down any free constant, then simplify by cancelling the common factor.
Step-by-Step Solution
- Numerator: (2x2−ax+1)−(ax2+3bx+2)=(2−a)x2−(a+3b)x−1.
- At x=−1: (2−a)(1)+(a+3b)−1=1+3b. For the limit (hence continuity) to exist finitely, this must be 0: b=−31.
- With b=−1/3, numerator becomes (2−a)x2−(a−1)x−1.
- Factor out (x+1): writing (2−a)x2−(a−1)x−1=(x+1)[(2−a)x−1] (verified by expansion, matching all coefficients). …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=⎩⎨⎧2−xx2−4,a,log(x−2),for x<2for x=2for x>2 is a real valued function and 'a' is a finite real number, then (A) f is continuous at x = 2 when a = 0 (B) f is left continuous at x = 2 when a = 0 (C) f is right continuous at x = 2 when a = log 2 (D) f is not continuous at x = 1
›Reveal solutionSolution
This tests one-sided limits at a piecewise junction; the left-hand limit at x=2 is 0 while the right-hand limit diverges to −∞, so option (B) is the only correct statement.
Concept and Intuition
For left continuity at x=2 we only need limx→2−f(x)=f(2); the behaviour on the other side is irrelevant. Since log(x−2)→−∞ as x→2+, no finite value of a can make f right-continuous or fully continuous at x=2 — so those statements must be false.
Step-by-Step Solution
- Left-hand limit: let x=2−h, h→0+. Then x2−4=(2−h)2−4=h2−4h=h(h−4) and 2−x=h.
- So 2−xx2−4=hh(h−4)=h(h−4)→0⋅(−4)=0.
- Left continuity at x=2 requires f(2)=a to equal this limit, i.e. a=0. So (B) is true.
- Right-hand limit: as x→2+, x−2→0+, so log(x−2)→−∞ — unbounded, so no finite a (in particular a=log2) can match it. So (C) is false, and (A) (needing both sides equal) is also false. …
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.Which one of the following function is discontinuous at x=1? (A) f(x)=sin2x+tan2x+cos2x−sec2x (B) f(x)=1+2sinx1 (C) f(x)=⎩⎨⎧∣x−1∣+2(x−1)2x−1,1,x=1x=1 (D) f(x)=ex+5
›Reveal solutionSolution
Options (A), (B), (D) simplify to functions that are continuous everywhere; option (C)'s one-sided limits at x=1 disagree (+1 from the right, −1 from the left), so it alone is discontinuous at x=1.
Concept and Intuition
For piecewise/rational-looking expressions, check whether the identity sin2x+cos2x=1 and sec2x−tan2x=1 collapse them to constants (continuous), whether a denominator can vanish, and — for absolute-value expressions — whether the left and right limits genuinely agree.
Step-by-Step Solution
- (A) f(x)=sin2x+tan2x+cos2x−sec2x=(sin2x+cos2x)−(sec2x−tan2x)=1−1=0 for all x where tan,sec are defined; at x=1 (radian) cos1=0, so it's fine and continuous (≡0 near x=1).
- (B) f(x)=1+2sinx1: since 2sinx>0 always, the denominator never vanishes (≥1+2−1=1.5); continuous everywhere, including x=1.
- (C) For x=1, let t=x−1: f=∣t∣+2t2t.
- As t→0+ (x→1+): ∣t∣=t, so f=t+2t2t=1+2t1→1.
- As t→0− (x→1−): ∣t∣=−t, so f=−t+2t2t=−1+2t1→−1. …
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If f:R→R defined by f(x)=⎩⎨⎧xsinx−sin2x,x3/2x2+x−x,x<0x>0 is continuous on R, then f(0)= (A) 1/2 (B) 3/2 (C) 1 (D) −1
›Reveal solutionSolution
This tests continuity of a piecewise function at the junction point using standard small-x approximations; both one-sided limits equal 1/2.
Concept and Intuition
A piecewise function is continuous at a boundary point only if the left-hand limit, right-hand limit, and the defined value at that point all agree. Here f(0) isn't given directly by either branch (both blow up as 0/0), so we must compute the limits from each side and set f(0) equal to their common value.
Step-by-Step Solution
- Left-hand limit (x→0−):
limx→0−xsinx−sin(x/2)
Use the small-angle expansion sint=t−6t3+⋯:
sinx−sin2x=(x−6x3)−(2x−48x3)+⋯=2x+O(x3)
Dividing by x: the limit is 21.
- Right-hand limit (x→0+):
limx→0+x3/2x2+x−x=limx→0+x3/2x(x+1−1)=limx→0+xx+1−1
Using 1+x≈1+2x−8x2+⋯:
xx+1−1≈xx/2=21 …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=x2cos4x−1, x=0 and f(0)=2 is a real valued function, then (A) x→0limf(x) does not exist (B) x→0limf(x)=1 (C) f is not continuous at x = 0 (D) f is continuous at x = 0
›Reveal solutionSolution
This tests factoring cos4x−1 and using the standard limit xsinx→1; the limit exists and equals −2, but f(0)=2, so f fails continuity at 0.
Concept and Intuition
cos4x−1 factors as a difference of squares twice: cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1). This lets us isolate the familiar (xsinx)2→1 building block.
Step-by-Step Solution
- cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1).
- f(x)=x2−sin2x(cos2x+1)=−(xsinx)2(cos2x+1).
- As x→0: (xsinx)2→1 and cos2x+1→2.
- So x→0limf(x)=−1×2=−2 — this limit exists (rules out (A)) and is not 1 (rules out (B)). …
- AP EAPCET 2023Set eng-2023-05-16-AN1 markMCQQ.If a function defined by f(x)=sinxlog(1+x)(3x−1)2, x=0, is continuous at x=0, then f(0)= (A) 2log3 (B) log32 (C) 2+log3 (D) (log3)2
›Reveal solutionSolution
Standard small-x equivalents give f(x)→(ln3)2 as x→0, so f(0)=(log3)2.
Concept and Intuition
For continuity at x=0, f(0) must equal limx→0f(x). Use the standard limits limx→0xax−1=lna, limx→0xsinx=1, limx→0xlog(1+x)=1.
Step-by-Step Solution
- (3x−1)2=x2(x3x−1)2→x2(ln3)2 as x→0.
- sinxlog(1+x)=x⋅xsinx⋅x⋅xlog(1+x)=x2⋅xsinx⋅xlog(1+x)→x2 as x→0.
- So f(x)=sinxlog(1+x)(3x−1)2→x2x2(ln3)2=(ln3)2. …
- AP EAPCET 2024Set eng-2024-05-20-AN1 markMCQQ.The values of a and b for which the function f(x)=⎩⎨⎧1+∣sinx∣a/∣sinx∣,b,etan2x/tan3x,6−π<x<0x=00<x<6π is continuous at x=0 are (A) a=1,b=32 (B) a=32,b=e2/3 (C) a=32,b=23 (D) a=−1,b=e2/3
›Reveal solutionSolution
Both one-sided limits must equal b; the right side gives e2/3 directly, and the left side (a (1+u)1/u→e-type limit) matches it when a=2/3 — (B).
Concept and Intuition
Continuity at x=0 requires x→0−limf(x)=f(0)=x→0+limf(x). The right branch is a standard eratio of small angles limit, and the left branch is the classical exponential limit (1+u)1/u→e as u→0, raised to a power a.
Step-by-Step Solution
- Right-hand limit: as x→0+, tan2x≈2x and tan3x≈3x, so tan3xtan2x→32. Hence x→0+limetan2x/tan3x=e2/3.
- Left-hand limit: let u=∣sinx∣→0+ as x→0−. The left branch is (1+u)a/u=[(1+u)1/u]a. Since (1+u)1/u→e, this tends to ea.
- For continuity: left limit = right limit =f(0)=b, i.e. ea=e2/3=b. …
- AP EAPCET 2021Set eng-2021-08-20-AN1 markMCQQ.If f(x)=sinx3loge(1+x2(tanx)), x=0 is to be continuous at x=0, then f(0) must be equal to ______ (A) 1 (B) 0 (C) 21 (D) −1
›Reveal solutionSolution
Using the small-angle equivalences loge(1+u)∼u, tanx∼x, and sinx3∼x3 near x=0, the limit of f(x) works out to 1, so f(0)=1 is required for continuity.
Concept and Intuition
For a function to be continuous at a removable-looking point like x=0, its value there must be defined equal to the limit of the function as x→0. Standard small-x equivalences (loge(1+u)∼u for small u; tanx∼x; sinx∼x) let us evaluate the 00-type limit cleanly.
Step-by-Step Solution
- As x→0, let u=x2tanx. Since tanx∼x for small x, u∼x2⋅x=x3→0.
- Using loge(1+u)∼u for small u: loge(1+x2tanx)∼x2tanx∼x3.
- For the denominator, sin(x3)∼x3 as x→0 (since sinθ∼θ for small θ, here θ=x3→0).
- So f(x)=sin(x3)loge(1+x2tanx)→x3x3=1 as x→0. …
- AP EAPCET 2021Set eng-2021-08-23-AN1 markMCQQ.If the function f(x), defined below, is continuous everywhere, then 'k' equals ______ f(x)=⎩⎨⎧1+x−12x−1,k,−1≤x<∞,x=0x=0 (A) 21loge2 (B) loge4 (C) loge8 (D) loge2
›Reveal solutionSolution
Continuity at x=0 requires k to equal the limit of f(x) as x→0, which works out to ln4 using standard small-x approximations.
Concept and Intuition
For f to be continuous at x=0, we need x→0limf(x)=f(0)=k. Both numerator and denominator vanish as x→0 (this is a 0/0 form), so we use the standard first-order approximations 2x−1≈xln2 and 1+x−1≈x/2 near x=0.
Step-by-Step Solution
- Numerator: 2x−1=exln2−1≈xln2 for small x.
- Denominator: 1+x−1=(1+x)1/2−1≈2x for small x (binomial expansion).
- So x→0lim1+x−12x−1=x→0limx/2xln2=2ln2. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.