Q.Is the function f defined by f(x)={x,5,if x≤1if x>1 continuous at x=0? At x=1? At x=2?
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Continuity At A Point — A function is continuous at x=a if limx→af(x)=f(a).
At x=0:
For x≤1, f(x)=x, so f(0)=0 and limx→0f(x)=0. The limit equals the function value.
⇒ f is continuous at x=0.
At x=1:
Left-hand limit: limx→1−f(x)=limx→1−x=1.
Right-hand limit: limx→1+f(x)=limx→1+5=5.
Since 1=5, the two-sided limit does not exist. …
The function is continuous at x=0 and x=2, but discontinuous at x=1 because the left-hand limit and right-hand limit exist but are not equal. The only point of discontinuity is x=1.
The Core Idea: Continuity at a Point
A function is continuous at a point x=a if three things happen:
- The function is defined at a (i.e., f(a) exists).
- The limit of f(x) as x approaches a exists.
- That limit equals the function value: limx→af(x)=f(a).
If any of these fails, the function is discontinuous at that point. For a piecewise function like this one, the only place where trouble can arise is at the "seam" — the point where the definition changes. Here, that seam is at x=1. At other points, the function is just a simple polynomial or a constant, both of which are continuous everywhere.
Let's check each point the question asks about.
1. At x=0
At x=0, the function is defined by the first piece: f(x)=x, since 0≤1.
- f(0)=0.
- Near x=0, the function is just the line y=x, which is continuous everywhere. So limx→0f(x)=0.
- Since limx→0f(x)=f(0), the function is continuous at x=0.
You don't need to check left and right limits separately at x=0 because the function is defined by the same rule on both sides of 0 (the rule f(x)=x works for all x near 0). The only point where the rule changes is x=1.
2. At x=1
This is the critical point. The function changes its rule here, so we must check the left-hand limit and right-hand limit separately.
- Left-hand limit (x→1−): For x just less than 1, f(x)=x. So
limx→1−f(x)=limx→1−x=1.
- Right-hand limit (x→1+): For x just greater than 1, f(x)=5. So
limx→1+f(x)=limx→1+5=5.
Since the left-hand limit (1) and the right-hand limit (5) are not equal, the two-sided limit limx→1f(x) does not exist.
- Function value: f(1)=1 (since 1≤1).
Even though f(1) exists, the limit does not exist, so the function is discontinuous at x=1. …
Method: Checking Continuity of a Piecewise Function at Several Given Points
When asked to check continuity 'at x=a, at x=b, at x=c' for a piecewise function, treat each point separately and first decide whether it is an interior point of one piece or a boundary/seam point where the rule changes.
Steps
Step 1: Classify each named point
For a point strictly inside one piece's interval, the function is simply that one formula near the point (a polynomial or standard function), so continuity there is automatic and needs only direct substitution.
Step 2: At a boundary/seam point, compute the function value using the rule that actually applies there
Read the inequality carefully (e.g. x≤a vs x>a) to determine which piece's formula gives f(a) — this is the value continuity will be measured against.
Step 3: Compute the left-hand and right-hand limits separately
limx→a−f(x)andlimx→a+f(x) …
Common Mistakes
Mistake 1: Doing a full left/right-limit check at every named point, including points far from any seam
Why it's wrong: it wastes time and invites arithmetic slips — at x=0 and x=2 in this problem, the function is governed by a single piece near each point, so a one-sided split is unnecessary. Correct approach: first identify where the piecewise definition actually changes (here, x=1), and only do the two-sided limit comparison there.
Mistake 2: Concluding continuity at the seam point just because f(a) equals one of the one-sided limits …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2024Set eng-2024-05-19-AN1 markMCQQ.The function f(x)=⎩⎨⎧5−x2,5−x,x<3x≥3 is (A) left discontinuous at x=3 (B) left continuous at x=3 (C) right discontinuous at x=5 (D) discontinuous at x=5
›Reveal solutionSolution
Checking the one-sided limits at the junction x=3 shows the function jumps from 1 to 2 on approach from the left, i.e. it is left-discontinuous (but right-continuous) at x=3; there is nothing special happening at x=5.
Concept and Intuition
A piecewise function can fail to be continuous from only one side at a junction point if the junction point itself is included in one branch. Here x=3 is the boundary, and it belongs to the 5−x branch (since that branch is defined for x≥3), so we must check whether the other branch's limit (from the left) agrees with the actual function value.
Step-by-Step Solution
- Function value at x=3: since x≥3 uses f(x)=5−x, f(3)=5−3=2.
- Left-hand limit as x→3−: uses f(x)=5−x2, so limx→3−5−x2=5−32=1.
- Since LHL =1=f(3)=2, the function is discontinuous when approached from the left — i.e. left discontinuous at x=3.
- Right-hand limit as x→3+: still 5−x→2=f(3), so it is right-continuous at x=3 — this rules out "left continuous" (option B, false). …
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.Which one of the following function is discontinuous at x=1? (A) f(x)=sin2x+tan2x+cos2x−sec2x (B) f(x)=1+2sinx1 (C) f(x)=⎩⎨⎧∣x−1∣+2(x−1)2x−1,1,x=1x=1 (D) f(x)=ex+5
›Reveal solutionSolution
Options (A), (B), (D) simplify to functions that are continuous everywhere; option (C)'s one-sided limits at x=1 disagree (+1 from the right, −1 from the left), so it alone is discontinuous at x=1.
Concept and Intuition
For piecewise/rational-looking expressions, check whether the identity sin2x+cos2x=1 and sec2x−tan2x=1 collapse them to constants (continuous), whether a denominator can vanish, and — for absolute-value expressions — whether the left and right limits genuinely agree.
Step-by-Step Solution
- (A) f(x)=sin2x+tan2x+cos2x−sec2x=(sin2x+cos2x)−(sec2x−tan2x)=1−1=0 for all x where tan,sec are defined; at x=1 (radian) cos1=0, so it's fine and continuous (≡0 near x=1).
- (B) f(x)=1+2sinx1: since 2sinx>0 always, the denominator never vanishes (≥1+2−1=1.5); continuous everywhere, including x=1.
- (C) For x=1, let t=x−1: f=∣t∣+2t2t.
- As t→0+ (x→1+): ∣t∣=t, so f=t+2t2t=1+2t1→1.
- As t→0− (x→1−): ∣t∣=−t, so f=−t+2t2t=−1+2t1→−1. …
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.Let f(x)=⎩⎨⎧0,2−x,2,21−x,2−3,x=0for 0<x<1for x=1for 1<x<2for x≥2 then which of the following is true (A) f is right continuous at x=0 (B) f is left continuous at x=1 (C) f is right continuous at x=1 (D) f is continuous at x=2
›Reveal solutionSolution
Compute the left-hand limit, right-hand limit, and function value at each candidate point and compare; only at x=2 do all three coincide.
Concept and Intuition
A function is continuous at a point if the left-hand limit, right-hand limit, and the function's value there all agree. "Right continuous" only needs the right-hand limit to equal the function value; "left continuous" only needs the left-hand limit to match.
Step-by-Step Solution
- At x=0: f(0)=0. Right-hand limit: limx→0+(2−x)=2. Since 2=0, f is not right continuous at 0 — (A) is false.
- At x=1: f(1)=2. Left-hand limit: limx→1−(2−x)=1. Since 1=2, not left continuous — (B) is false. Right-hand limit: limx→1+(21−x)=−21. Since −21=2, not right continuous either — (C) is false. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=⎩⎨⎧2−xx2−4,a,log(x−2),for x<2for x=2for x>2 is a real valued function and 'a' is a finite real number, then (A) f is continuous at x = 2 when a = 0 (B) f is left continuous at x = 2 when a = 0 (C) f is right continuous at x = 2 when a = log 2 (D) f is not continuous at x = 1
›Reveal solutionSolution
This tests one-sided limits at a piecewise junction; the left-hand limit at x=2 is 0 while the right-hand limit diverges to −∞, so option (B) is the only correct statement.
Concept and Intuition
For left continuity at x=2 we only need limx→2−f(x)=f(2); the behaviour on the other side is irrelevant. Since log(x−2)→−∞ as x→2+, no finite value of a can make f right-continuous or fully continuous at x=2 — so those statements must be false.
Step-by-Step Solution
- Left-hand limit: let x=2−h, h→0+. Then x2−4=(2−h)2−4=h2−4h=h(h−4) and 2−x=h.
- So 2−xx2−4=hh(h−4)=h(h−4)→0⋅(−4)=0.
- Left continuity at x=2 requires f(2)=a to equal this limit, i.e. a=0. So (B) is true.
- Right-hand limit: as x→2+, x−2→0+, so log(x−2)→−∞ — unbounded, so no finite a (in particular a=log2) can match it. So (C) is false, and (A) (needing both sides equal) is also false. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=x2cos4x−1, x=0 and f(0)=2 is a real valued function, then (A) x→0limf(x) does not exist (B) x→0limf(x)=1 (C) f is not continuous at x = 0 (D) f is continuous at x = 0
›Reveal solutionSolution
This tests factoring cos4x−1 and using the standard limit xsinx→1; the limit exists and equals −2, but f(0)=2, so f fails continuity at 0.
Concept and Intuition
cos4x−1 factors as a difference of squares twice: cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1). This lets us isolate the familiar (xsinx)2→1 building block.
Step-by-Step Solution
- cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1).
- f(x)=x2−sin2x(cos2x+1)=−(xsinx)2(cos2x+1).
- As x→0: (xsinx)2→1 and cos2x+1→2.
- So x→0limf(x)=−1×2=−2 — this limit exists (rules out (A)) and is not 1 (rules out (B)). …
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If f:R→R defined by f(x)=⎩⎨⎧xsinx−sin2x,x3/2x2+x−x,x<0x>0 is continuous on R, then f(0)= (A) 1/2 (B) 3/2 (C) 1 (D) −1
›Reveal solutionSolution
This tests continuity of a piecewise function at the junction point using standard small-x approximations; both one-sided limits equal 1/2.
Concept and Intuition
A piecewise function is continuous at a boundary point only if the left-hand limit, right-hand limit, and the defined value at that point all agree. Here f(0) isn't given directly by either branch (both blow up as 0/0), so we must compute the limits from each side and set f(0) equal to their common value.
Step-by-Step Solution
- Left-hand limit (x→0−):
limx→0−xsinx−sin(x/2)
Use the small-angle expansion sint=t−6t3+⋯:
sinx−sin2x=(x−6x3)−(2x−48x3)+⋯=2x+O(x3)
Dividing by x: the limit is 21.
- Right-hand limit (x→0+):
limx→0+x3/2x2+x−x=limx→0+x3/2x(x+1−1)=limx→0+xx+1−1
Using 1+x≈1+2x−8x2+⋯:
xx+1−1≈xx/2=21 …
- AP EAPCET 2026Set eng-2026-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧(2+5x22+3x2)x28+3,k,for x=0for x=0 is a continuous function at x=0, then k= (A) e−2 (B) e−4 (C) e−8 (D) e−16
›Reveal solutionSolution
This tests the standard 1∞ exponential limit technique. Taking logs and expanding to first order in x2 gives k=e−8.
Concept and Intuition
Expressions of the form (base →1)power→∞ are evaluated by writing L=elim(power)⋅log(base) and expanding log(1+u)≈u for the small quantity u= base−1. The constant added to the exponent (here +3) never survives, since it multiplies a term that itself →0.
Step-by-Step Solution
- For continuity at x=0: k=limx→0(2+5x22+3x2)8/x2+3.
- Let L denote this limit. Then logL=limx→0(x28+3)log(2+5x22+3x2).
- Write the base as 1+u where u=2+5x22+3x2−1=2+5x2−2x2≈−x2 for small x (to leading order).
- log(1+u)≈u≈−x2 for small x. …
- AP EAPCET 2026Set eng-2026-05-18-FN1 markMCQQ.If f(x) defined by f(x)=⎩⎨⎧4x−π1−tanx,k,x=4π,x∈[0,2π]x=4π is continuous in [0,2π], then k= (A) −1 (B) −21 (C) 21 (D) 1
›Reveal solutionSolution
Substituting x=π/4+h and using the tangent subtraction identity, the limit of
4x−π1−tanx as x→π/4 works out to −21, which is the required
value of k.
Concept and Intuition
For continuity at x=π/4, we need k=limx→π/4f(x). Since the expression is 0/0
at x=π/4, shifting variables via x=π/4+h (so h→0) turns tanx into
tan(π/4+h), which has a clean expansion using the tangent-addition formula.
Step-by-Step Solution
- Let x=4π+h, so h→0 as x→π/4.
- tan(4π+h)=1−tanh1+tanh.
- 1−tanx=1−1−tanh1+tanh=1−tanh(1−tanh)−(1+tanh)=1−tanh−2tanh
- 4x−π=4(4π+h)−π=4h.
- So
f(x)=4h(1−tanh)−2tanh
- As h→0, tanh∼h, so …
- AP EAPCET 2023Set eng-2023-05-19-FN1 markMCQQ.If a function f(x) defined on [a,b] is discontinuous at x=α∈(a,b), then (A) x→α−limf(x)=x→α+limf(x)=f(α) (B) x→αlimf(x)=f(α) (C) x→a−limf(x)=f(a) (D) x→b+limf(x)=f(b)
›Reveal solutionSolution
Discontinuity at an interior point is, by definition, the failure of "limit equals function value" there.
Concept and Intuition
A function is continuous at α iff limx→αf(x)=f(α) (which subsumes both one-sided limits agreeing with each other and with f(α)). Discontinuity is simply the negation of this statement.
Step-by-Step Solution
- Continuity at α∈(a,b) means limx→α−f(x)=limx→α+f(x)=f(α) — this is option (A), which must be false since f is given to be discontinuous at α.
- The negation of continuity is exactly: the limit at α (however it behaves) is not equal to f(α) — option (B). …
- AP EAPCET 2025Set eng-2025-05-23-AN1 markMCQQ.If a real valued function f(x)=⎩⎨⎧(1+sinx)cosecx,a,ae2/x+be3/xe2/x+e3/x,−π/2<x<0x=00<x<π/2 is continuous at x = 0, then ab= (A) e (B) e2 (C) 1 (D) −1
›Reveal solutionSolution
The left-hand limit is the classical 1∞ form giving e, fixing a=e;
the right-hand limit needs dividing by the dominant exponential to fix b.
Continuity forces both, and ab=1.
Concept and Intuition
A piecewise function is continuous at a point only if the left-hand limit,
right-hand limit, and the function's value there all agree. Here the left
piece is a 1∞ indeterminate form (standard trick: exponentiate and use
log(1+u)∼u), and the right piece is a ratio of two exponentials growing at
different rates as x→0+ (since 1/x→+∞), so the faster-growing
exponential e3/x dominates and everything else becomes negligible after
dividing through by it.
Step-by-Step Solution
- Left limit: L=limx→0−(1+sinx)cosecx. Take logs: logL=limcosecx⋅log(1+sinx)=limsinxsinx(1+O(sinx))→1. So L=e. Continuity requires f(0)=a=L=e.
- Right limit: R=limx→0+ae2/x+be3/xe2/x+e3/x. Divide numerator and denominator by e3/x: R=limx→0+ae−1/x+be−1/x+1. …
- AP EAPCET 2024Set eng-2024-05-21-AN1 markMCQQ.If the function f(x)=x1+x−1 is continuous at x=0 then f(0)= (A) −21 (B) 31 (C) 21 (D) −31
›Reveal solutionSolution
Rationalizing the numerator turns the 0/0 form into a simple limit, which must equal f(0) for continuity.
Concept and Intuition
For f to be continuous at x=0, we need f(0)=x→0limf(x). Since the given formula for f(x) is 0/0 at x=0, we must simplify it algebraically first.
Step-by-Step Solution
- x1+x−1=x(1+x+1)(1+x−1)(1+x+1)=x(1+x+1)(1+x)−1=x(1+x+1)x=1+x+11.
- As x→0: 1+11=21. …
- AP EAPCET 2023Set eng-2023-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧x−2x−[x],b,a(2+x−x2)∣x2−x−2∣,2a−b,x>2x=2−1<x≤2x≤−1 is continuous on R, then x→0limx2sin2ax+xtanbx= (A) 0 (B) 1 (C) 2 (D) 3
›Reveal solutionSolution
Continuity of the piecewise function pins down a=1,b=1; substituting these into the limit expression and using standard small-angle limits gives 2.
Concept and Intuition
For a piecewise function to be continuous at a junction point, the one-sided limits and the defined value there must all agree. Here the junctions at x=2 and x=−1 give the equations needed to solve for the unknown constants a,b before the actual limit can be evaluated.
Step-by-Step Solution
- Right limit at x=2: for x slightly >2, [x]=2, so f(x)=x−2x−2=1. So limx→2+f(x)=1.
- Left limit at x=2 (third piece): x2−x−2=(x−2)(x+1) and 2+x−x2=−(x−2)(x+1). For x near 2−: (x−2)<0,(x+1)>0, so ∣x2−x−2∣=(2−x)(x+1) and 2+x−x2=(2−x)(x+1) too. So the ratio simplifies to a1 throughout (−1,2).
- Continuity at x=2: 1=b=a1⇒a=1, b=1.
- Check at x=−1: piece 4 value =2a−b=2−1=1; piece 3's limit as x→−1+ is also a1=1. Consistent ✓. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.