Q.Find all points of discontinuity of f, where f is defined by f(x)={x10−1,x2,if x≤1if x>1
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
Concept: Continuity At A Point — a function is continuous at x=a if limx→af(x)=f(a). For a piecewise function, check the left-hand limit, right-hand limit, and the function value at the break point.
Step 1: Evaluate f(1)
Since x≤1 uses the first piece,
f(1)=110−1=0.
Step 2: Compute left-hand limit as x→1−
Using the same piece:
limx→1−f(x)=limx→1−(x10−1)=110−1=0.
Step 3: Compute right-hand limit as x→1+
Using the second piece:
limx→1+f(x)=limx→1+x2=12=1.
Step 4: Compare …
Each piece is a polynomial, so f is continuous everywhere except possibly at x=1. There the left limit is 0 but the right limit is 1, so f is discontinuous only at x=1.
The function is
f(x)={x10−1,x2,x≤1x>1.
1. Away from x=1. For x<1, f(x)=x10−1 is a polynomial and hence continuous. For x>1, f(x)=x2 is a polynomial and hence continuous. So f is continuous at every point except possibly x=1.
2. At x=1. From the definition (x≤1 branch), f(1)=110−1=0.
- Left-hand limit: x→1−limf(x)=x→1−lim(x10−1)=1−1=0. …
Method: Numerically Verifying Whether Two Polynomial Pieces Agree at Their Boundary
Even when both pieces of a function look like "nice," smooth polynomials, they can still disagree at the point where they meet — this method shows how to check that rigorously rather than by eye.
Steps
Step 1: Pin down f(a) using the correctly-matched piece
Match the boundary value a to whichever inequality includes equality, and substitute into that formula only.
Step 2: Substitute directly into each side's formula to get both one-sided limits
limx→a−f(x)=(left formula evaluated at a),limx→a+f(x)=(right formula evaluated at a)
Direct substitution is valid here because polynomials have no gaps or jumps on their own open interval.
Step 3: Compare the two numeric results, not the formulas themselves …
Common Mistakes
Mistake 1: Assuming two smooth polynomial pieces automatically meet at the same height at their boundary
Why it's wrong: both x10−1 and x2 are well-behaved polynomials, but being individually smooth says nothing about whether they agree at the shared point x=1 — here they genuinely give different values (0 versus 1). Correct approach: always substitute and compute the actual numbers on both sides rather than assuming agreement from how "nice" each piece looks. …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.Let f(x)=⎩⎨⎧0,2−x,2,21−x,2−3,x=0for 0<x<1for x=1for 1<x<2for x≥2 then which of the following is true (A) f is right continuous at x=0 (B) f is left continuous at x=1 (C) f is right continuous at x=1 (D) f is continuous at x=2
›Reveal solutionSolution
Compute the left-hand limit, right-hand limit, and function value at each candidate point and compare; only at x=2 do all three coincide.
Concept and Intuition
A function is continuous at a point if the left-hand limit, right-hand limit, and the function's value there all agree. "Right continuous" only needs the right-hand limit to equal the function value; "left continuous" only needs the left-hand limit to match.
Step-by-Step Solution
- At x=0: f(0)=0. Right-hand limit: limx→0+(2−x)=2. Since 2=0, f is not right continuous at 0 — (A) is false.
- At x=1: f(1)=2. Left-hand limit: limx→1−(2−x)=1. Since 1=2, not left continuous — (B) is false. Right-hand limit: limx→1+(21−x)=−21. Since −21=2, not right continuous either — (C) is false. …
- AP EAPCET 2023Set eng-2023-05-18-FN1 markMCQQ.Which one of the following function is discontinuous at x=1? (A) f(x)=sin2x+tan2x+cos2x−sec2x (B) f(x)=1+2sinx1 (C) f(x)=⎩⎨⎧∣x−1∣+2(x−1)2x−1,1,x=1x=1 (D) f(x)=ex+5
›Reveal solutionSolution
Options (A), (B), (D) simplify to functions that are continuous everywhere; option (C)'s one-sided limits at x=1 disagree (+1 from the right, −1 from the left), so it alone is discontinuous at x=1.
Concept and Intuition
For piecewise/rational-looking expressions, check whether the identity sin2x+cos2x=1 and sec2x−tan2x=1 collapse them to constants (continuous), whether a denominator can vanish, and — for absolute-value expressions — whether the left and right limits genuinely agree.
Step-by-Step Solution
- (A) f(x)=sin2x+tan2x+cos2x−sec2x=(sin2x+cos2x)−(sec2x−tan2x)=1−1=0 for all x where tan,sec are defined; at x=1 (radian) cos1=0, so it's fine and continuous (≡0 near x=1).
- (B) f(x)=1+2sinx1: since 2sinx>0 always, the denominator never vanishes (≥1+2−1=1.5); continuous everywhere, including x=1.
- (C) For x=1, let t=x−1: f=∣t∣+2t2t.
- As t→0+ (x→1+): ∣t∣=t, so f=t+2t2t=1+2t1→1.
- As t→0− (x→1−): ∣t∣=−t, so f=−t+2t2t=−1+2t1→−1. …
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If f:R→R defined by f(x)=⎩⎨⎧xsinx−sin2x,x3/2x2+x−x,x<0x>0 is continuous on R, then f(0)= (A) 1/2 (B) 3/2 (C) 1 (D) −1
›Reveal solutionSolution
This tests continuity of a piecewise function at the junction point using standard small-x approximations; both one-sided limits equal 1/2.
Concept and Intuition
A piecewise function is continuous at a boundary point only if the left-hand limit, right-hand limit, and the defined value at that point all agree. Here f(0) isn't given directly by either branch (both blow up as 0/0), so we must compute the limits from each side and set f(0) equal to their common value.
Step-by-Step Solution
- Left-hand limit (x→0−):
limx→0−xsinx−sin(x/2)
Use the small-angle expansion sint=t−6t3+⋯:
sinx−sin2x=(x−6x3)−(2x−48x3)+⋯=2x+O(x3)
Dividing by x: the limit is 21.
- Right-hand limit (x→0+):
limx→0+x3/2x2+x−x=limx→0+x3/2x(x+1−1)=limx→0+xx+1−1
Using 1+x≈1+2x−8x2+⋯:
xx+1−1≈xx/2=21 …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=⎩⎨⎧2−xx2−4,a,log(x−2),for x<2for x=2for x>2 is a real valued function and 'a' is a finite real number, then (A) f is continuous at x = 2 when a = 0 (B) f is left continuous at x = 2 when a = 0 (C) f is right continuous at x = 2 when a = log 2 (D) f is not continuous at x = 1
›Reveal solutionSolution
This tests one-sided limits at a piecewise junction; the left-hand limit at x=2 is 0 while the right-hand limit diverges to −∞, so option (B) is the only correct statement.
Concept and Intuition
For left continuity at x=2 we only need limx→2−f(x)=f(2); the behaviour on the other side is irrelevant. Since log(x−2)→−∞ as x→2+, no finite value of a can make f right-continuous or fully continuous at x=2 — so those statements must be false.
Step-by-Step Solution
- Left-hand limit: let x=2−h, h→0+. Then x2−4=(2−h)2−4=h2−4h=h(h−4) and 2−x=h.
- So 2−xx2−4=hh(h−4)=h(h−4)→0⋅(−4)=0.
- Left continuity at x=2 requires f(2)=a to equal this limit, i.e. a=0. So (B) is true.
- Right-hand limit: as x→2+, x−2→0+, so log(x−2)→−∞ — unbounded, so no finite a (in particular a=log2) can match it. So (C) is false, and (A) (needing both sides equal) is also false. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=x2cos4x−1, x=0 and f(0)=2 is a real valued function, then (A) x→0limf(x) does not exist (B) x→0limf(x)=1 (C) f is not continuous at x = 0 (D) f is continuous at x = 0
›Reveal solutionSolution
This tests factoring cos4x−1 and using the standard limit xsinx→1; the limit exists and equals −2, but f(0)=2, so f fails continuity at 0.
Concept and Intuition
cos4x−1 factors as a difference of squares twice: cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1). This lets us isolate the familiar (xsinx)2→1 building block.
Step-by-Step Solution
- cos4x−1=(cos2x−1)(cos2x+1)=−sin2x(cos2x+1).
- f(x)=x2−sin2x(cos2x+1)=−(xsinx)2(cos2x+1).
- As x→0: (xsinx)2→1 and cos2x+1→2.
- So x→0limf(x)=−1×2=−2 — this limit exists (rules out (A)) and is not 1 (rules out (B)). …
- AP EAPCET 2022Set eng-2022-07-04-AN1 markMCQQ.Let f(x)=⎩⎨⎧∣x∣1,ax2+b,for ∣x∣>1for ∣x∣≤1. If x→1limf(x) and x→−1limf(x) exist, then the possible values for a and b are (A) a=b=1 (B) a=−21,b=−23 (C) a=23,b=−21 (D) a=21,b=−23
›Reveal solutionSolution
Both one-sided limits at x=±1 force a+b=1; checking the options, only a=23,b=−21 satisfies this.
Concept and Intuition
The function is piecewise, switching definition exactly at ∣x∣=1. For the limit to exist at a switch-point, the two pieces must approach the same value from either side — this is the usual "match the boundary values" condition for piecewise functions.
Step-by-Step Solution
- Near x=1: for x slightly less than 1 we're in the ax2+b branch (∣x∣≤1); for x slightly more than 1 we're in the 1/∣x∣ branch.
- Left limit: a(1)2+b=a+b.
- Right limit: ∣1∣1=1.
- Condition: a+b=1.
- Near x=−1: for x slightly less than −1 (i.e. ∣x∣>1), branch is 1/∣x∣; for x slightly more than −1 (i.e. ∣x∣<1), branch is ax2+b.
- Left limit: 1/∣−1∣=1.
- Right limit: a(−1)2+b=a+b.
- Condition: a+b=1 (same equation again). …
- Near x=1: for x slightly less than 1 we're in the ax2+b branch (∣x∣≤1); for x slightly more than 1 we're in the 1/∣x∣ branch.
- AP EAPCET 2021Set eng-2021-08-20-AN1 markMCQQ.If f(x)=sinx3loge(1+x2(tanx)), x=0 is to be continuous at x=0, then f(0) must be equal to ______ (A) 1 (B) 0 (C) 21 (D) −1
›Reveal solutionSolution
Using the small-angle equivalences loge(1+u)∼u, tanx∼x, and sinx3∼x3 near x=0, the limit of f(x) works out to 1, so f(0)=1 is required for continuity.
Concept and Intuition
For a function to be continuous at a removable-looking point like x=0, its value there must be defined equal to the limit of the function as x→0. Standard small-x equivalences (loge(1+u)∼u for small u; tanx∼x; sinx∼x) let us evaluate the 00-type limit cleanly.
Step-by-Step Solution
- As x→0, let u=x2tanx. Since tanx∼x for small x, u∼x2⋅x=x3→0.
- Using loge(1+u)∼u for small u: loge(1+x2tanx)∼x2tanx∼x3.
- For the denominator, sin(x3)∼x3 as x→0 (since sinθ∼θ for small θ, here θ=x3→0).
- So f(x)=sin(x3)loge(1+x2tanx)→x3x3=1 as x→0. …
- AP EAPCET 2024Set eng-2024-05-19-AN1 markMCQQ.The function f(x)=⎩⎨⎧5−x2,5−x,x<3x≥3 is (A) left discontinuous at x=3 (B) left continuous at x=3 (C) right discontinuous at x=5 (D) discontinuous at x=5
›Reveal solutionSolution
Checking the one-sided limits at the junction x=3 shows the function jumps from 1 to 2 on approach from the left, i.e. it is left-discontinuous (but right-continuous) at x=3; there is nothing special happening at x=5.
Concept and Intuition
A piecewise function can fail to be continuous from only one side at a junction point if the junction point itself is included in one branch. Here x=3 is the boundary, and it belongs to the 5−x branch (since that branch is defined for x≥3), so we must check whether the other branch's limit (from the left) agrees with the actual function value.
Step-by-Step Solution
- Function value at x=3: since x≥3 uses f(x)=5−x, f(3)=5−3=2.
- Left-hand limit as x→3−: uses f(x)=5−x2, so limx→3−5−x2=5−32=1.
- Since LHL =1=f(3)=2, the function is discontinuous when approached from the left — i.e. left discontinuous at x=3.
- Right-hand limit as x→3+: still 5−x→2=f(3), so it is right-continuous at x=3 — this rules out "left continuous" (option B, false). …
- AP EAPCET 2023Set eng-2023-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧x−2x−[x],b,a(2+x−x2)∣x2−x−2∣,2a−b,x>2x=2−1<x≤2x≤−1 is continuous on R, then x→0limx2sin2ax+xtanbx= (A) 0 (B) 1 (C) 2 (D) 3
›Reveal solutionSolution
Continuity of the piecewise function pins down a=1,b=1; substituting these into the limit expression and using standard small-angle limits gives 2.
Concept and Intuition
For a piecewise function to be continuous at a junction point, the one-sided limits and the defined value there must all agree. Here the junctions at x=2 and x=−1 give the equations needed to solve for the unknown constants a,b before the actual limit can be evaluated.
Step-by-Step Solution
- Right limit at x=2: for x slightly >2, [x]=2, so f(x)=x−2x−2=1. So limx→2+f(x)=1.
- Left limit at x=2 (third piece): x2−x−2=(x−2)(x+1) and 2+x−x2=−(x−2)(x+1). For x near 2−: (x−2)<0,(x+1)>0, so ∣x2−x−2∣=(2−x)(x+1) and 2+x−x2=(2−x)(x+1) too. So the ratio simplifies to a1 throughout (−1,2).
- Continuity at x=2: 1=b=a1⇒a=1, b=1.
- Check at x=−1: piece 4 value =2a−b=2−1=1; piece 3's limit as x→−1+ is also a1=1. Consistent ✓. …
- AP EAPCET 2026Set eng-2026-05-18-FN1 markMCQQ.If f(x) defined by f(x)=⎩⎨⎧4x−π1−tanx,k,x=4π,x∈[0,2π]x=4π is continuous in [0,2π], then k= (A) −1 (B) −21 (C) 21 (D) 1
›Reveal solutionSolution
Substituting x=π/4+h and using the tangent subtraction identity, the limit of
4x−π1−tanx as x→π/4 works out to −21, which is the required
value of k.
Concept and Intuition
For continuity at x=π/4, we need k=limx→π/4f(x). Since the expression is 0/0
at x=π/4, shifting variables via x=π/4+h (so h→0) turns tanx into
tan(π/4+h), which has a clean expansion using the tangent-addition formula.
Step-by-Step Solution
- Let x=4π+h, so h→0 as x→π/4.
- tan(4π+h)=1−tanh1+tanh.
- 1−tanx=1−1−tanh1+tanh=1−tanh(1−tanh)−(1+tanh)=1−tanh−2tanh
- 4x−π=4(4π+h)−π=4h.
- So
f(x)=4h(1−tanh)−2tanh
- As h→0, tanh∼h, so …
- AP EAPCET 2024Set eng-2024-05-21-AN1 markMCQQ.If the function f(x)=x1+x−1 is continuous at x=0 then f(0)= (A) −21 (B) 31 (C) 21 (D) −31
›Reveal solutionSolution
Rationalizing the numerator turns the 0/0 form into a simple limit, which must equal f(0) for continuity.
Concept and Intuition
For f to be continuous at x=0, we need f(0)=x→0limf(x). Since the given formula for f(x) is 0/0 at x=0, we must simplify it algebraically first.
Step-by-Step Solution
- x1+x−1=x(1+x+1)(1+x−1)(1+x+1)=x(1+x+1)(1+x)−1=x(1+x+1)x=1+x+11.
- As x→0: 1+11=21. …
- AP EAPCET 2025Set eng-2025-05-27-FN1 markMCQQ.If the function f defined by f(x)=⎩⎨⎧x21−cos4x,a,16+x−4x,x<0x=0x>0 is continuous at x=0, then a= (A) 1 (B) 2 (C) 4 (D) 8
›Reveal solutionSolution
Continuity at x=0 requires the left limit, the right limit, and f(0)=a to all agree; both one-sided limits work out to 8. Answer: a=8.
Concept and Intuition
For a piecewise function to be continuous at a junction point, the value defined there (a) must equal both the limit approaching from the left and the limit approaching from the right. Each side here needs a standard trick: the trig side uses the double-angle identity 1−cosθ=2sin2(θ/2), and the surd side needs rationalisation to remove the − indeterminate form.
Step-by-Step Solution
- Left-hand limit (x→0−): 1−cos4x=2sin2(2x), so
limx→0−x21−cos4x=limx→0−x22sin2(2x)=2limx→0(2xsin2x)2⋅4=2⋅1⋅4=8.
- Right-hand limit (x→0+): rationalise 16+x−4x by multiplying top and bottom by 16+x+4: (16+x)−16x(16+x+4)=xx(16+x+4)=16+x+4. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.