Q.Find the values of k so that the function f is continuous at the indicated point, where f is defined by f(x)={kx2,3,if x≤2if x>2 at x=2
🔒You're viewing a preview — the full solution, concept, methods & PYQ mapping are locked.
🔒 Start your 14-day free trial to unlock the full solution →Concept understanding — Continuity At A Point
Continuity at a Point
Imagine drawing the graph of a function and putting your pen down at x=a. If the function is continuous there, you can draw straight through that point without lifting your pen — no jump, no hole, no break. That is the intuition; here is the precision.
The Three-Condition Test
For f(x) to be continuous at x=a, all three must hold. If even one fails, f is discontinuous there.
Continuity at x=a requires:
- f(a) is defined,
- x→alimf(x) exists (left- and right-hand limits are equal),
- x→alimf(x)=f(a).
Condition 1 says a is in the domain — the pen must have somewhere to land. Condition 2 says the curve approaches a single value from both sides — no jump. Condition 3 says that common approach value actually matches the function's value at a — no misplaced point.
Why All Three Are Needed
f(x)=x−1x2−1 has limx→1f(x)=2, yet f(1) is undefined (zero denominator). Condition 1 fails, leaving a hole at (1,2).
A piecewise function shows the opposite can be fine:
f(x)=⎩⎨⎧x+13x+1x<2x=2x>2
Here f(2)=3, both one-sided limits equal 3, and they match f(2) — so all three hold and f is continuous at x=2.
Common Pitfalls
"Limit exists" does not mean "continuous." The hole example has a limit but no continuity — the limit must equal the function value.
"Defined everywhere" does not mean "continuous." A piecewise function can have a value at every point and still jump. Always check the one-sided limits.
A Quick Check …
The key idea is continuity at a point: a function f is continuous at x=a if limx→af(x)=f(a). For a piecewise function, we check the left-hand limit, right-hand limit, and the function value at the point.
Step 1: Compute the left-hand limit as x→2−.
For x≤2, f(x)=kx2, so
limx→2−f(x)=k(2)2=4k.
Step 2: Compute the right-hand limit as x→2+.
For x>2, f(x)=3, so
limx→2+f(x)=3.
Step 3: The function value at x=2 is f(2)=k(2)2=4k (since x≤2 includes x=2). …
For a piecewise function to be continuous at the switch point, the left-hand limit, right-hand limit, and the function's value there must all be equal. Here, continuity at x=2 forces k=43; for any other k, the function has a jump discontinuity.
We are checking continuity at x=2 — the point where the definition of f changes. The function is given by two different rules on either side of 2, so the standard three-part test applies:
A function f is continuous at x=a if and only if
limx→a−f(x)=limx→a+f(x)=f(a).
If even one of these equalities fails, the function is discontinuous at that point.
- Find the left-hand limit (x→2−). For x≤2, the rule is f(x)=kx2. As x approaches 2 from the left, we substitute directly (since kx2 is a polynomial, hence continuous everywhere):
limx→2−f(x)=limx→2−kx2=k(2)2=4k.
- Find the right-hand limit (x→2+). For x>2, the rule is f(x)=3, a constant function. So:
limx→2+f(x)=limx→2+3=3.
- Find the function value at x=2. The definition says: for x≤2, use kx2. Since 2 satisfies x≤2, we have:
f(2)=k(2)2=4k.
- Apply the continuity condition. We need:
limx→2−f(x)=limx→2+f(x)=f(2).
That gives:
4k=3and3=4k.
Both conditions are the same equation. Solving:
4k=3⇒k=43. …
Method: Finding an Unknown Constant So a Piecewise Polynomial Matches a Constant Piece
Use this when one piece of a piecewise function is a polynomial containing an unknown constant, the other piece is a plain number (or another simple expression), and you must find the constant that makes the two pieces meet without a jump at the boundary.
Steps
Step 1: Identify which piece actually defines the function value at the boundary
Look carefully at whether the boundary inequality is ≤/≥ (includes the point) on the polynomial side or the other side — this decides which formula to use for f(a) itself.
Step 2: Compute the left-hand limit using the polynomial piece
Substitute the boundary value into the polynomial containing the unknown constant; since polynomials are continuous everywhere, this limit equals direct substitution.
Step 3: Compute the right-hand limit using the other piece …
Common Mistakes
Mistake 1: Using the wrong piece to evaluate f(2)
Why it's wrong: since the condition is x≤2 (not x<2), the polynomial piece kx2 — not the constant piece — defines f(2); using the constant piece here is a common slip that silently changes which equation gets solved. Correct approach: read the inequality symbols carefully (≤ vs <) before deciding which formula supplies the boundary point's value.
Mistake 2: Not realizing continuity here reduces to a single equation
Why it's wrong: because f(2) equals the same expression as the left-hand limit (4k), a student might think there are two independent equations to solve, when in fact two of the three required quantities are automatically equal, leaving just one genuine condition (4k=3). Correct approach: write out all three quantities (LHL, RHL, f(2)) explicitly first, then see how many genuinely independent equations remain before solving. …
Showing the 12 most recent of 32 on this concept.
- AP EAPCET 2021Set eng-2021-08-19-FN1 markMCQQ.f(x)=⎩⎨⎧2−1+cosx72x−9x−8x+1,klog2log3,x=0x=0 Find the value of 'k' for which the function f is continuous. (A) 2 (B) 24 (C) 183 (D) 242
›Reveal solutionSolution
Factoring the numerator as (9x−1)(8x−1) and expanding the denominator via 1+cosx=2cos2(x/2) gives the limit 242ln2ln3, so k=242.
Concept and Intuition
Both numerator and denominator vanish as x→0 — a 0/0 form best handled by recognizing the standard small-x approximations ax−1≈xloga and 1−cosθ≈θ2/2, rather than repeated L'Hôpital. Spotting that 72=9×8 lets the numerator factor neatly, turning a messy expression into a clean product of two standard limits.
Step-by-Step Solution
- Since 72=9×8: 72x−9x−8x+1=9x8x−9x−8x+1=(9x−1)(8x−1).
- As x→0: 9x−1∼xln9, 8x−1∼xln8, so numerator ∼x2ln9ln8.
- 1+cosx=2cos2(x/2), so 1+cosx=2cos(x/2) (for small x).
- Denominator =2−2cos(x/2)=2(1−cos2x)∼2⋅2(x/2)2=82x2.
- Limit =2x2/8x2ln9ln8=28ln9ln8. …
- AP EAPCET 2026Set eng-2026-05-14-FN1 markMCQQ.If f(x)=⎩⎨⎧(π−x)22+cosx−1,k,x=πx=π is continuous at x=π, then k= (A) 1 (B) 21 (C) 2 (D) 41
›Reveal solutionSolution
Continuity at x=π requires k to equal the limit of the given expression as x→π; using a small-angle substitution, that limit is 41.
Concept and Intuition
For f to be continuous at x=π, we need k=x→πlim(π−x)22+cosx−1. Substituting x=π−h (so h→0 as x→π) converts the trig limit into a small-h approximation problem, where standard expansions (cosh≈1−h2/2, 1+t≈1+t/2) make the limit easy to evaluate.
Step-by-Step Solution
- Let x=π−h, so as x→π, h→0, and π−x=h.
- cosx=cos(π−h)=−cosh.
- So 2+cosx=2−cosh. Using cosh≈1−2h2 for small h: 2−cosh≈2−1+2h2=1+2h2.
- 2+cosx≈1+2h2≈1+4h2 (using 1+t≈1+t/2 with t=h2/2).
- So 2+cosx−1≈4h2.
- The denominator is (π−x)2=h2. …
- AP EAPCET 2024Set eng-2024-05-22-FN1 markMCQQ.Let f(x)=⎩⎨⎧0,2−x,2,21−x,2−3,x=0for 0<x<1for x=1for 1<x<2for x≥2 then which of the following is true (A) f is right continuous at x=0 (B) f is left continuous at x=1 (C) f is right continuous at x=1 (D) f is continuous at x=2
›Reveal solutionSolution
Compute the left-hand limit, right-hand limit, and function value at each candidate point and compare; only at x=2 do all three coincide.
Concept and Intuition
A function is continuous at a point if the left-hand limit, right-hand limit, and the function's value there all agree. "Right continuous" only needs the right-hand limit to equal the function value; "left continuous" only needs the left-hand limit to match.
Step-by-Step Solution
- At x=0: f(0)=0. Right-hand limit: limx→0+(2−x)=2. Since 2=0, f is not right continuous at 0 — (A) is false.
- At x=1: f(1)=2. Left-hand limit: limx→1−(2−x)=1. Since 1=2, not left continuous — (B) is false. Right-hand limit: limx→1+(21−x)=−21. Since −21=2, not right continuous either — (C) is false. …
- AP EAPCET 2024Set eng-2024-05-18-FN1 markMCQQ.f(x)=⎩⎨⎧x+1(2x2−ax+1)−(ax2+3bx+2),k,if x=−1if x=−1 is a real valued function. If a,b,k∈R and f is continuous on R then k= (A) −31 (B) 6 (C) a−2 (D) a−3
›Reveal solutionSolution
Continuity at the removable-type point requires the numerator to vanish there (fixing b) and then simplifying the quotient to evaluate k as a limit. The answer is k=a−3.
Concept and Intuition
A rational expression x+1N(x) can only have a finite limit as x→−1 if N(−1)=0 (otherwise the limit is ±∞ and no choice of k can make f continuous there). So the first job is to use that vanishing condition to pin down any free constant, then simplify by cancelling the common factor.
Step-by-Step Solution
- Numerator: (2x2−ax+1)−(ax2+3bx+2)=(2−a)x2−(a+3b)x−1.
- At x=−1: (2−a)(1)+(a+3b)−1=1+3b. For the limit (hence continuity) to exist finitely, this must be 0: b=−31.
- With b=−1/3, numerator becomes (2−a)x2−(a−1)x−1.
- Factor out (x+1): writing (2−a)x2−(a−1)x−1=(x+1)[(2−a)x−1] (verified by expansion, matching all coefficients). …
- AP EAPCET 2026Set eng-2026-05-15-AN1 markMCQQ.If f(x)=⎩⎨⎧(2+5x22+3x2)x28+3,k,for x=0for x=0 is a continuous function at x=0, then k= (A) e−2 (B) e−4 (C) e−8 (D) e−16
›Reveal solutionSolution
This tests the standard 1∞ exponential limit technique. Taking logs and expanding to first order in x2 gives k=e−8.
Concept and Intuition
Expressions of the form (base →1)power→∞ are evaluated by writing L=elim(power)⋅log(base) and expanding log(1+u)≈u for the small quantity u= base−1. The constant added to the exponent (here +3) never survives, since it multiplies a term that itself →0.
Step-by-Step Solution
- For continuity at x=0: k=limx→0(2+5x22+3x2)8/x2+3.
- Let L denote this limit. Then logL=limx→0(x28+3)log(2+5x22+3x2).
- Write the base as 1+u where u=2+5x22+3x2−1=2+5x2−2x2≈−x2 for small x (to leading order).
- log(1+u)≈u≈−x2 for small x. …
- AP EAPCET 2024Set eng-2024-05-22-AN1 markMCQQ.If a real valued function f(x)=⎩⎨⎧3x2−7x−62x2+(k+2)x+9,l,x=3x=3 is continuous at x=3 and l is a finite value, then l−k= (A) 1131 (B) 11124 (C) 24 (D) 32
›Reveal solutionSolution
A removable discontinuity forces the numerator to share the vanishing factor (x−3); solving gives k=−11, l=113, so l−k=11124.
Concept and Intuition
When a rational function's denominator vanishes at the point of interest but the function is stated to be continuous there (with a finite value), the numerator must vanish there too — otherwise the limit would blow up. This forces the numerator to contain the same factor as the denominator, which can then be cancelled.
Step-by-Step Solution
- Denominator: 3x2−7x−6 at x=3 gives 27−21−6=0. Factor: 3x2−7x−6=(x−3)(3x+2).
- For f to be continuous at x=3 with finite l, the numerator must also vanish at x=3: 2(3)2+(k+2)(3)+9=18+3k+6+9=33+3k=0⇒k=−11.
- With k=−11, numerator becomes 2x2−9x+9. Check x=3: 18−27+9=0 ✓. Factor: 2x2−9x+9=(x−3)(2x−3).
- So for x=3: f(x)=(x−3)(3x+2)(x−3)(2x−3)=3x+22x−3. …
- AP EAPCET 2026Set eng-2026-05-15-FN1 markMCQQ.If f(x)=⎩⎨⎧2−xx2−4,a,log(x−2),for x<2for x=2for x>2 is a real valued function and 'a' is a finite real number, then (A) f is continuous at x = 2 when a = 0 (B) f is left continuous at x = 2 when a = 0 (C) f is right continuous at x = 2 when a = log 2 (D) f is not continuous at x = 1
›Reveal solutionSolution
This tests one-sided limits at a piecewise junction; the left-hand limit at x=2 is 0 while the right-hand limit diverges to −∞, so option (B) is the only correct statement.
Concept and Intuition
For left continuity at x=2 we only need limx→2−f(x)=f(2); the behaviour on the other side is irrelevant. Since log(x−2)→−∞ as x→2+, no finite value of a can make f right-continuous or fully continuous at x=2 — so those statements must be false.
Step-by-Step Solution
- Left-hand limit: let x=2−h, h→0+. Then x2−4=(2−h)2−4=h2−4h=h(h−4) and 2−x=h.
- So 2−xx2−4=hh(h−4)=h(h−4)→0⋅(−4)=0.
- Left continuity at x=2 requires f(2)=a to equal this limit, i.e. a=0. So (B) is true.
- Right-hand limit: as x→2+, x−2→0+, so log(x−2)→−∞ — unbounded, so no finite a (in particular a=log2) can match it. So (C) is false, and (A) (needing both sides equal) is also false. …
- AP EAPCET 2021Set eng-2021-08-23-AN1 markMCQQ.If the function f(x), defined below, is continuous everywhere, then 'k' equals ______ f(x)=⎩⎨⎧1+x−12x−1,k,−1≤x<∞,x=0x=0 (A) 21loge2 (B) loge4 (C) loge8 (D) loge2
›Reveal solutionSolution
Continuity at x=0 requires k to equal the limit of f(x) as x→0, which works out to ln4 using standard small-x approximations.
Concept and Intuition
For f to be continuous at x=0, we need x→0limf(x)=f(0)=k. Both numerator and denominator vanish as x→0 (this is a 0/0 form), so we use the standard first-order approximations 2x−1≈xln2 and 1+x−1≈x/2 near x=0.
Step-by-Step Solution
- Numerator: 2x−1=exln2−1≈xln2 for small x.
- Denominator: 1+x−1=(1+x)1/2−1≈2x for small x (binomial expansion).
- So x→0lim1+x−12x−1=x→0limx/2xln2=2ln2. …
- AP EAPCET 2023Set eng-2023-05-16-AN1 markMCQQ.If a function defined by f(x)=sinxlog(1+x)(3x−1)2, x=0, is continuous at x=0, then f(0)= (A) 2log3 (B) log32 (C) 2+log3 (D) (log3)2
›Reveal solutionSolution
Standard small-x equivalents give f(x)→(ln3)2 as x→0, so f(0)=(log3)2.
Concept and Intuition
For continuity at x=0, f(0) must equal limx→0f(x). Use the standard limits limx→0xax−1=lna, limx→0xsinx=1, limx→0xlog(1+x)=1.
Step-by-Step Solution
- (3x−1)2=x2(x3x−1)2→x2(ln3)2 as x→0.
- sinxlog(1+x)=x⋅xsinx⋅x⋅xlog(1+x)=x2⋅xsinx⋅xlog(1+x)→x2 as x→0.
- So f(x)=sinxlog(1+x)(3x−1)2→x2x2(ln3)2=(ln3)2. …
- AP EAPCET 2026Set eng-2026-05-18-FN1 markMCQQ.If f(x) defined by f(x)=⎩⎨⎧4x−π1−tanx,k,x=4π,x∈[0,2π]x=4π is continuous in [0,2π], then k= (A) −1 (B) −21 (C) 21 (D) 1
›Reveal solutionSolution
Substituting x=π/4+h and using the tangent subtraction identity, the limit of
4x−π1−tanx as x→π/4 works out to −21, which is the required
value of k.
Concept and Intuition
For continuity at x=π/4, we need k=limx→π/4f(x). Since the expression is 0/0
at x=π/4, shifting variables via x=π/4+h (so h→0) turns tanx into
tan(π/4+h), which has a clean expansion using the tangent-addition formula.
Step-by-Step Solution
- Let x=4π+h, so h→0 as x→π/4.
- tan(4π+h)=1−tanh1+tanh.
- 1−tanx=1−1−tanh1+tanh=1−tanh(1−tanh)−(1+tanh)=1−tanh−2tanh
- 4x−π=4(4π+h)−π=4h.
- So
f(x)=4h(1−tanh)−2tanh
- As h→0, tanh∼h, so …
- AP EAPCET 2023Set eng-2023-05-15-FN1 markMCQQ.If f:R→R defined by f(x)=⎩⎨⎧xsinx−sin2x,x3/2x2+x−x,x<0x>0 is continuous on R, then f(0)= (A) 1/2 (B) 3/2 (C) 1 (D) −1
›Reveal solutionSolution
This tests continuity of a piecewise function at the junction point using standard small-x approximations; both one-sided limits equal 1/2.
Concept and Intuition
A piecewise function is continuous at a boundary point only if the left-hand limit, right-hand limit, and the defined value at that point all agree. Here f(0) isn't given directly by either branch (both blow up as 0/0), so we must compute the limits from each side and set f(0) equal to their common value.
Step-by-Step Solution
- Left-hand limit (x→0−):
limx→0−xsinx−sin(x/2)
Use the small-angle expansion sint=t−6t3+⋯:
sinx−sin2x=(x−6x3)−(2x−48x3)+⋯=2x+O(x3)
Dividing by x: the limit is 21.
- Right-hand limit (x→0+):
limx→0+x3/2x2+x−x=limx→0+x3/2x(x+1−1)=limx→0+xx+1−1
Using 1+x≈1+2x−8x2+⋯:
xx+1−1≈xx/2=21 …
- AP EAPCET 2024Set eng-2024-05-23-FN1 markMCQQ.If f(x)=⎩⎨⎧a+x−a−xa2−ax+x2−x2+ax+a2,K,x=0x=0 is continuous at x=0, then K= (A) −a (B) a (C) −1 (D) a+a
›Reveal solutionSolution
This is a 0/0 form at x=0; rationalizing both the numerator and denominator turns it into a clean limit that evaluates to −a.
Concept and Intuition
Whenever both numerator and denominator vanish at the point of interest, multiplying each by its conjugate surd converts the difference-of-square-roots into a simple polynomial difference, which then cancels the common factor causing the indeterminacy.
Step-by-Step Solution
- Let N(x)=a2−ax+x2−a2+ax+x2. Multiply and divide by the conjugate:
N(x)=a2−ax+x2+a2+ax+x2(a2−ax+x2)−(a2+ax+x2)=a2−ax+x2+a2+ax+x2−2ax
- Let D(x)=a+x−a−x. Similarly,
D(x)=a+x+a−x(a+x)−(a−x)=a+x+a−x2x
- So f(x)=D(x)N(x)=a2−ax+x2+a2+ax+x2−2ax×2xa+x+a−x. …
🎓Unlock everything free for 14 days
- ✓Full step-by-step solutions
- ✓Concept-first explanations
- ✓Methods, shortcuts & mistakes
- ✓PYQ mapping + timed mock tests
Full access for 14 days. No credit card required.